Ask Seller 
Finance
Homag "Optimat KL 73/A3" Edgebander 
Preview
Panel Processing Machinery in Mound House, Nevada
Tiffin, OH
Starts In remaining
Dorel Home Furnishings - Ameriwood - Day 1 ( Preview #73252952 )
Complete Facility is closing and ALL assets being offered. There is over 900 lots being offered in this online sale. Located in Tiffin, H the facility is 550,000 SQ'. Don't miss out on this rare opportunity!
-
Pick Up Location
Mound House, Nevada
-
Make
Homag
-
Model
"Optimat KL 73/A3"
-
Serial Number
0-200-08-3686
-
Year
1999
-
Phase
3 PHASE
-
Voltage
480 VOLT
-
Buyer Inspection Period
TBD
-
Load Out Period
TBD
-
Estimated Dimensions
210" x 60" x 84"
-
Estimated Weight
7,500 Lbs
-
Seller Comment
A non-negotionable loading fee has been established. This includes loading onto a flat bed trailer.
-
Load Fee
250.00
-
Lot Notes
-
page views
23
Homag "Optimat KL 73/A3" Edgebander
0.3 - 3 mm Edge thickness cap., min. panel width 55 mm; max. panel thickness 55 mm; Feed speed variable up to 18 to 24 MPM (59' to 78' FPM).
Hot Melt Glue System with reversible glue roller applicator.
Edge Coil Magazine.
Pressure roll section with (3) rollers, (1) large dia. driven & (2) idle rollers; manual adjustment of pressure zone through SIKO digital counters for different edge thicknesses.
HOMATIC "NC 21" Control System Industrial PC and PLC programmable memory control system w keyboard, LCD 10.4" display and line control.
End Trimming: Light weight, high speed (2 x 0.25 HP - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel.
Flush/Pre-Trimming Unit: Top & bottom trim station, 1.5 kW (2.0 HP - 12,000 RPM) +/- 1° angle adjustment, manual positioning with digital counters.
Bevel/Fine-Trimming Unit: Top & bottom fine or bevel trimming 2 x 0.4 KW (0.5 HP), 12000 RPM motors, max. edge thickness 8 mm (5/16"), tilts 0 - 30° with manual digital counter positioning.
Profile Scraper: Top/Bottom, for radius scraping, 1,2, 3 mm thick pvc edges. "HD" Workstation with large horizontal/vertical copy wheels and digital read-outs for profile knife positioning.
Buffing Unit # 4402: Oscillating top and bottom 2 x 0.25 kW - 2,850 RPM, incline and height adjustable with top pressure beam.
Adjustable outboard panel support for up to 800 mm.
80 mm Feed track pads; Motorized top pressure beam with V-belt and Sound/Safety enclosure over workstations.
Machine has been disconnected/dismantled and prepared for shipping for convenience of sale. A rigger will be onsite January 28th & 29th to load. Loading charge will be $250. These are the only (2) days available to load.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginNo information available