Homag "KAL 310/11/E12" Edgebander/Softformer

Edgebanding thickness 0.3 - 12 mm; min. workpiece width 125 mm, panel thickness 7 - 60 mm, 50 mm panel overhang, profile depth top 20 mm and 15 mm for bottom; adjustable infeed fence w/digital readout. 

Top & bottom solvent spray application unit (model "2929"); top & bottom inlay scoring unit with (2) 1.2 HP - 12,000 RPM non-tiltable motors, tracing from top & side and equipped w/diamond tooling (model "1135"). 

(2) 4.5 HP - 9,000 RPM Tiltable milling/profiling heads with selectable rotation switches (1st one jump, 2nd one fixed), SIKO digitals for horizontal & vertical adjustments (model "UF 12"); air blast nozzle for cleaning panel edges. 

"Quick Melt" Glue system "QE 34" w/pre-melt granular hopper and with reversible DC drive for glue application roller to either substrate or banding material; heated glue roller and automatic sensor to control melting quantity. 

Model "HL 26" strip & coil feed edgebanding magazine for max. 3 mm thick coil banding and strip feed for up to 12 mm thickness; (1) Large 200 mm dia. drive roll and a 4-position revolver pressure section with (3) sets of softforming pressure rolls (for G-profiles) and (1) set of straight idle pressure rolls; cooling blower at end of pressure zone and air jet for cleaning panel overhang area. - Top "Pizza" knife for inlay profile w/vertical & horizontal tracing. 

End trimming unit with (2) 0.6 HP - 12,000 RPM motors, pneumatic selection of chamfer or straight cutting; features manual lateral setting for max. 28 mm softforming depth. 

Top & bottom flush trimming unit with (2) 1.4 HP - 12,000 RPM non-tiltable motors (model "3209"); top & bottom chamfer trimming unit with (2) 0.6 HP - 12,000 RPM motors, tiltable 0ø to 30ø (model "3216"). 

Universal milling/grooving station with 0-90ø tilt, pneumatic jump, reversible cutter rotation by switch, SIKO digital adjustment vertical and horizontal. 

Top & bottom disc sanders with SIKO digital counters, dust collection. 

(2) Edge/profile sanding aggregates with lead & trailing edge protection, dust collection, pneumatic exlusion from control panel. 

Line control with HOMATIC "PC 22" controller features: Real-time operating system, functions in Windows environment; w/PC compatible keyboard, 10.4" LCD flat panel display and Ethernet net work connection. Stores working programs and controls functions of workstations, allows fault diagnostic and more; storage of (40) working programs, each with (160) functions for remote control of processing units. 

80 mm Wide feed track w/central chain track lubrication, 5 HP feed drive, variable feed speed to 24 m/min; passline height 950 mm; powered raise-and-lower of upper pressure beam with powered "V" belt type holddown; All trim station motors are 200 Cy HF and equipped w/electronic frequency inverter for control of motor speed and braking; workstations with SIKO digital readouts; Adjustable outrigger panel support up to 31-1/2" and with (5) floor supports, sound enclosures w/windows over tenoner section and all trim stations in edgebander section.