2023 Pillar "HPLD" CNC Lock Dowel Machine

Made in USA

This is a brand-new machine that was never delivered or installed.

Factory warranty, installation and delivery within the contiguous 48 states are included.

See generic sales video of this model in operation, for reference only, not all options apply.

The model HPLD is a horizontal point to point bore and Lock Dowell insertion machining center. It is
designed to CNC position the spindle, bore a hole, then CNC position and insert the Lock Dowel
hardware.  Standard operation consists of:  placing part into the work zone referencing the back and side fences. The palm button is pressed and the clamps secure the part into place. The machining is now ready to begin in the work zone. There are two fixed zones and two pop up zones standard in the base model HPLD allowing for pendulum processing. While the one part is being machined, the other zone(s) can be loaded and queued for machining.

Designed for "Lock Dowel System" - channel lock 20 mm barbed post and 8 mm spring pin

49" maximum width capacity

Unlimited length capacity

1/2" - 1" thickness capacity

96" table length made of 1" thick aluminum and covered with non-slip material

Left, center and right reference fences

     Center fence is pneumatically controlled so it can drop down for full table use

Adjustable back fence

X axis - CNC controlled, rack and pinion

Y and Z axis - manual movement/adjustment

Eight (8) pneumatic clamps

Two (2) 3 HP routers, 18,000 RPM

Inserter for channel lock 20 mm barbed post

Inserter for 8 mm spring pin

Inserter for wood dowel with dowel hopper

Touch screen controller

     15" color screen

     Ability to create and store machine programs

Industrial computer with Windows operating system

Bar code scanner