× This item is no longer available for purchase.
Active

DMC "EUROSYSTEM ES-M2-1350" WIDE BELT SANDER, YEAR 2019

LOCATED IN San Antonio, TX

Listing Image
Price $74,550.00 USD ( )
Or
This item is available for direct purchase from the seller. No bidding is required.
Details
  • Located San Antonio, TX
  • MAKE DMC
  • MODEL EUROSYSTEM ES-M2-1350
  • SERIAL NUMBER AE/00000985
  • YEAR 2019 MANUFACTURED, INSTALLED AS LOANER IN 2021
  • PHASE 3 PHASE
  • VOLTAGE 480 VOLT
  • ESTIMATED DIMENSIONS 18' X 92" X 112"
  • ESTIMATED WEIGHT 9000LBS

  • Item # 36005474
  • Qty Available 1
  • 1460 Page Views
Description

 

**THIS MACHINE WAS ONLY USED FOR APPROXIMATELY 4 MONTHS AS A LOANER TO CUSTOMER PRIOR TO THEIR NEW 5-HEAD MACHINE BEING DELIVERED.  THIS MACHINE SOLD NEW WELL IN EXCESS OF $200,000.00

***SPECS. AS FROM ORIGINAL QUOTATION OF MACHINE.

AUTOMATIC WIDE BELT SANDER

dmc eurosystem 3 belt cross/kombi/ superfinish head

For Veneer, Solid and MDF

MAIN TECHNICAL FEATURES

Working width 1.350 mm
Base structure for longitudinal operating units with belts length 2.620 mm
Control panel on the machine
Belts feeding on the left side of the machine
Belt feed speed 2 to 16 m/min
Rear speed rubber-coated roller
Automatic device for conveyor belt centering
Rubber coated pressure rollers infeeding/outfeeding the working units
Supporting roller table consisting of 2 rollers infeeding and outfeeding the working unit
PLC "X20" for the complete management of every machine function

PRO-SAND electronic control
PLC terminal with LCD colour display 10,4"
Graphic representation of the machine configuration
Machine control from touch screen, in manual mode or by means of 120
Working programs configurable by the operator
Insertion/disconnection in working position and timing of the roller and pad groups
Total control of the "EPICS" electronic sectional pads with activation, exclusion and selection of the pad. Pre-selection and activation of the + or - sectors
Function on the left/right panel side
Control of the following functions:
* belt feed speed
* working thickness
* speed and rotation direction of the sanding belt
Sequential automatic start-up of main motors
Blowers timing control for belts cleaning and for rotating blowers
Control of the slotted panel program
Machine report (working and stand-by hours)
Machine damage alarms control and breakage self-diagnose on the electronic cards Modular hardware structure for the management of the machine functions
from "PRO-SAND" control

SAFETY DEVICES/EMERGENCY DEVICES

"Hand-safety" emergency device in the infeed area
Front and rear emergency push button
Padlockable main switch
Automatic emergency stop for, not tensioned, lateral mistracking abrasive belt Emergency stop for lack or interruption of compressed air

Electric probes for brakes wear control
Magneto thermal protections on the motors
Micro to detect panel feeding
Safety Micro for over thickness
Infeed grooved rubber coated pressure roller equipped with “anti-kickback” safety device
Machine execution according to C.E. Norms

Production code: DMC ES M2 1350
ELECTRIC EXECUTION ACCORDING TO CANADA N.1 DMC EUROSYSTEM M2 1350 N.1 SINGLE-PHASE TRANSFORMER N.1

PF200 LIFTING UNIT FOR FIXED WORKING TABLE AT 900 N.1 MM FROM GROUND

* Working thickness 3 to 200 mm

BL 32 INFEED PANELS READING BAR FOR 'EPICS' N.1 SECTIONED PADS PITCH 32 MM

480 VOLTAGE N.1 FREQUENCY 60 HZ N.1 P.C. LANGUAGE ENGLISH N.1 INFEEDING WORKING UNITS N.1

TA-5000 FRONT CROSS PAD UNIT N.1

Complete with:
- Linear blower with timed intervention for the sanding belt cleaning
- Automatic brake
- Sanding belt dimensions
- Chevron belt dimensions

mm 150 x 5000 mm 140 x 4710

PE 32T 'EPICS' SECTIONED ELECTRONIC SANDING PAD N. 1

* 32 mm center-to-center distance of sectors;
* Double action pneumatic cylinders with adjustable push/counter push;
* Graphite cloth with quick extraction device;
* Total management of its functionality by “Pro-Sand” electronic control.

31.03.35

N.1

COMP: R004502 2020

MOTORIZED ROTATING BLOWER
MOTOR DRIVEN BY INVERTER, POWER UP TO 15 KW FIRST POSITION

KRP 150-2620 COMBINED WORKING UNIT FOR ROLLER DIAMETER 150 MM AND SANDING PAD

* Sanding belt rotation against the conveyor feed direction * Pneumatic On/off for the roller working positioning
* Roller position adjustment complete with digital readout * Electronic sanding belt swing control

* Automatic brake
* Sanding belt dimensions mm 1370 x 2620

R85-150 ROLLER WITH 85 SH RUBBER COATING

PE 32/L 'EPICS' SECTIONED ELECTRONIC SANDING PAD N. 1 PITCH 32 MM

* 32 mm center-to-center distance of sectors
* Double action pneumatic cylinders with adjustable push/counter push
* Graphite cloth with quick extraction device
* Total management of its functionality by “Pro-Sand” electronic control”

COMP: R004502 2020

25.00.70

N.1

TIMED OSCILLATING CLEANING BLOWER 18,5 KW MOTOR DRIVEN BY INVERTER

PR-E PRESSURE BAR COMPLETE WITH 2 RUBBER COATED ROLLERS INFEEDING THE WORKING UNIT

SECOND POSITION

S-2620 OPERATING UNIT FOR SUPERFINISHING PAD

Complete with:
 Sanding belt rotation against the conveyor feed direction  Electronic sanding belt swing control
 Automatic brake
 Chevron belt dimensions mm 1370 x 2186
 Sanding belt dimensions mm 1370 x 2620

PE 32/L 'EPICS' SECTIONED ELECTRONIC SANDING PAD

PITCH 32 MM

* 32 mm center-to-center distance of sectors
* Double action pneumatic cylinders with adjustable push/counter push
* Graphite cloth with quick extraction device
* Total management of its functionality by “Pro-Sand” electronic control”

TIMED OSCILLATING CLEANING BLOWER 15 KW MOTOR DRIVEN BY INVERTER

PR-I PRESSURE BAR COMPLETE WITH 2 RUBBER COATED ROLLERS BETWEEN TWO WORKING UNITS

OUTFEEDING WORKING POSITION

SB/U OSCILLATING WORKING UNIT FOR ABRASIVE CLOTH COATED ROLLER DIAMETER 200 MM

* 200 mm brush diameter
* 2,2 kW (3 HP) main motor
* exhaust hood
* roller position adjustment
* outfeed rubber-coated pressure roller

SB 200 UFC ABRASIVE CLOTH COATED ROLLER DIAMETER 200 MM ' ULTRA FINE' TYPE WITH SILICON CARBIDE FIBERS

SRP/U TIMED OSCILLATING CLEANING BLOWERS UNIT

PUNCHED WORK-TOP AND CONVEYOR BELT PRESET FOR VACUUM DEVICE (FOR 2 INTERNAL WORKING STATIONS)

VACUUM MOTOR POWERED BY INVERTER UP TO 5,5 KW INTEGRATED IN THE MACHINE FRAME

Vacuum management by inverter

RUBBER COATED BELT CONVEYOR 50 SH

FRONT SUPPORTING WORKTOP EQUIPPED WITH FIVE IDLE ROLLERS

REAR SUPPORTING WORKTOP EQUIPPED WITH FIVE IDLE N.1 ROLLERS

3 KW FEED BELT MOTOR DRIVEN BY INVERTER N.1

VISION PANEL DOOR POSITIONED ON THE SERVICE SIDE N.1 FOR MACHINE EQUIPPED WITH 2 WORKING UNITS

INTERNAL LED LIGHTING N.1 NYLON PACKING N.1 MACHINE LANGUAGE: ENGLISH N.1 MACHINE LANGUAGE: FRENCH N.1

Questions & Answers Sign In

There are no questions for this listing.