Brandt Automatic Edgebander KDF 430 C Optimat

Electronic Easy Control EC-10+

Integrated line control for controlling machine operations. User interface via keyboard or backlit LCD display.

- Long-life foil keyboard
- Large backlit LCD display: 4 rows, 20 columns
- Quickly-accessible unit functions
- Touch buttons with LED indicators for various station selection - Simple menu structure
- Multi-language capable
- Plain text information messages – no cryptic codes
- Storage of up to four (4) user-defined programs

Equipped with digital height indicator.

Feed speed 11 meters / minute

Integrated electronic line control system for increased reliability and diagnostic assistance. No limit switches used for setting operating units.

Universal automatic magazine for strip and coil feeding.
Large coil table (800 mm diameter) to accommodate large coils of 3 mm PVC. Adjustable in feed fence.
Joint trimming unit with two cutter heads. For trimming the panel edge.

** IMPORTANT NOTE ** Although this machine is capable of running thicker panels, the pre-mill cutter heads on this machine are only 42 mm working height! If pre- milling of panels thicker than 42 mm is desired, please obtain an alternate quote which includes 60 mm working height pre-mill cutter heads.

Hot melt granulate glue application system with approximately twelve minute heat-up time. No lubrication required for maintenance.

Reversible rotation of glue application roller. Retractable glue roller. Strengthened precutter for cutting PVC (max. 3 x 45 mm) from the coil.

Double motor end trimming unit with straight and chamfer capability. Chamfer up to 15°. Program controlled indexing from straight to bevel.

Fine trimming unit with auto-tilt and digital “Quickset” system. Contour trimming unit.
Scraping unit with program controlled pneumatic indexing. Buffing unit.

Electronic frequency changer for all trimming motors which also incorporates electronic motor brakes.

Electrical components according to UL/CSA Listings. 3/24/2008

Technical Specifications

Electrical connection: 208/230 or 440/480 volt, 3-phase, 50 Hz. Dustextraction:1x120mm(43/4"),3x60mm(23/8”),1x100mm( 4”), 1400CFM. Compressed air connection: 0.18 CFM per panel, 6 bar (85 PSI).

Easy Control EC-10+

Integrated Electronic Line Control System for Increased Reliability and Diagnostic Assistance

Page 2 Brt. KDF 430 C Optimat specs.

3/24/2008

Joint Trimming Unit

• pre-trimming of the work piece edge prior to gluing

• two motors, 3 HP each, 12,000 RPM

• one motor clockwise rotation, one counter-clockwise

• vertical spindle adjustment via digital settings

Page 3 Brt. KDF 430 C Optimat specs.

• horizontal positioning via electro-pneumatic control

• dust extraction hood included with 120 mm diameter outlet ( 4 3⁄4 “ )

• diamond cutter heads

  Automatic Magazine for Strip and Coil Feeding

  • large coil table (800 mm diameter) with built-in rollers to allow for 3 mm PVC coils

  • edge strip capacity from 0.4 mm to 8 mm (0.016” – 5/16”)

  • direction of glue roller reversible

  • glue roller section is also retractable from fence line

  • one large driven pressure roller with pneumatic pressure control

  • two secondary rollers, all with controlled side pressure

  • setting of pressure zone equipped with digital counter accurate to .1 mm (.004")

  • strengthened precutter for cutting thick PVC edges from the coil; maximum 3 x 45

    mm

    Standard Gluing System

• heat-up time is twelve minutes

• no lubrication is needed for this unit.

• quick-change glue tank for easy maintenance and glue color change, if necessary

• glue temperature indication of both the gluing unit and glue roller via LED

  thermostat display visible to operator

• automatic temperature reduction if not run within 15 minutes. This feature lowers

  the temperature automatically to 150 degrees C.

  Sound Cover

  • equipped with two independent openings

  • safety interlock system - when sound enclosure door is opened, corresponding work

    station shuts off

  • end trimming and fine trimming motors are each equipped with electronic motor

    brakes to stop cutter rotation when hood is opened or when station is shut off at operator control panel

    End Trimming Station

    • straight/chamfer end trim unit equipped with two 0.18 kw (1/4 HP) 12,000 RPM motors; electronic motor brakes

    • end trim unit utilizes drawing cut system for reduced blade projection when working on thick panels

    • tooling also included

    • program controlled indexing from straight to bevel end trimming

      Fine Trimming Unit

• equipped with two .55 kw (3/4 HP) 12,000 RPM trimming motors 3/24/2008

Page 4 Brt. KDF 430 C Optimat specs.

• auto-tilt for cutter positioning when processing thin edge, thick PVC and solid wood edges

• horizontal and vertical tracing with lateral location indexing via digital “Quickset” system calibrating to .1 mm (.004”)

• each trimming motor is equipped with one dust hood and dust extraction hose

• equipped with two DFC combination straight/radius cutter heads, including four

  knife carbide inserts; flush trimming possible up to 8 mm edge thickness; radius - 3 mm

  Contour Trimming Unit

  • for corner rounding of thick PVC edgings

  • 3 mm radius reversible profile knives standard Scraping Unit with Knives

• for scraping of roughly trimmed thick PVC edges in order to remove the cutter marks

• 3 mm radius reversible profile knives standard

• program controlled pneumatic indexing

  Top and Bottom Buffing Unit

  • top and bottom buffing motors for finishing of longitudinal edges

  • two 2800 RPM polishing motors

  • inclinable vertically and horizontally

  • two buffing wheels included

    IN CASE OF INCOMING MAIN VOLTAGE FLUCTUATIONS OF MORE THAN +10% / - 5% OF MACHINE CONNECTED VOLTAGE, A VOLTAGE STABILIZER MUST BE INSTALLED BY THE CUSTOMER ON THE INCOMING POWER CONNECTION.

3/24/2008