Homag "KDF 440 C" Edgebander with Air Tec, Return Conveyor, and Dust Collector

See video of system in operation

Edgebander

Minimum panel length, 160 mm/6.375"

Minimum panel width, 70 mm/2.75"

Panel thickness, 8 mm/0.3" - 60 mm/2.375"

Power Touch 2 program control

     Full HD multi-touch 22" display in widescreen

Motorized top pressure beam for panel thickness adjustment

Variable track speed up to 46 FPM

     3 HP feed motor

31" diameter coil table

     Built in rollers to allow for 3 mm PVC rolls

Edge strip capacity, 0.4 - 8 mm

Coil capacity, 3 mm x 45 mm (H)

Panel pre-heating

Adjustable infeed fence with servo motor control

Pneumatically-controlled hard stop on infeed to prevent premature panel feeding

Two (2) motor pre-mill unit

     3 HP motors operating at 12,000 RPM (one CW and one CCW rotation)

     Vertical spindle adjustment via digital settings

     Horizontal positioning via electro-pneumatic control

Machine can run EVA OR PUR Glue

     Quick-change tank

     Reversible glue roller rotation

     Glue temperature indication of glue roller via LED display

     Infrared radiant glue heat zone control

     Automatic temperature reduction if machine is idle for 15 minutes

Air Tec AT-15 reactivation unit for use with laser edgebanding to provide zero glueline results

     Adjustable temperature and pressure via program control

     40 mm maximum part thickness when using Air Tec

     15 m/min. (49 FPM) maximum feed speed when using Air Tec

Spray mist lubrication system for delicate surfaces (such as high-gloss)

Anti-static spray mist unit

Pressure zone

     Motorized positioning

     One (1) driven roller

     Two (2) idle rollers

Two (2) motor end trimming unit

     0.5 HP motors, 12000 RPM

     Chamfer up to 15 degrees

     Program controlled indexing from straight to bevel end trimming

     Motor brake

Multi-stage, top/bottom fine trimming unit

     0.75 HP motors, 12000 RPM

     Three (3) positions:  profile 1, profile 2, flush

     Auto-tilt and servo controlled horizontal tracing rollers

     Servo motor controlled positioning to edge thickness

     Motor brake

(1) motor multi function contour trimming unit

     Corner rounding and/or continuous trimming of top/bottom edge

     0.5 HP motor, 12000 RPM

     Magnetic linear drive system with soft touch feature

     Motor brake

     12 - 60 mm panel thickness

     3 mm maximum edge thickness

Quick-change scraping unit

     Program-controlled pneumatic indexing

     Vertical and horizontal tracing wheels

     External collection box

Finish scraping unit

Top/bottom buffing unit

     0.25 HP motors, 2800 RPM

     20 mm x 150 mm cloth discs

     Inclinable

Lighted sound enclosure

     Two (2) doors

     Safety interlock

Outboard roller support

Automatic feed track lubrication system

External electrical transformer

Spare glue pot

Manuals and tools

All Flex Hose, and Nordfab Quick Connect Dust Pipe Included 

Homag "Boomerang TFU 120/R/15/055" Return Conveyor

Left hand configuration.

After panels come off a through-feed machine feed-track, they are transported via (6) powered take-up belt onto a 90° transfer section and returned back to the operator.

Working Length, 12" - 98" (300 - 2,500 mm), working width 2" - 57" (50 - 1,450 mm), panel thickness 0.3" - 2.3" (8 - 60 mm) & and 100 Lbs max. weight.

Variable Feed-Speed 26 - 131 FPM (8 - 40 MPM); (4) 18" pickup arms, take product from the edgebander and transport it to cross transfer conveyor section.

42" x 83" Receiving section transfers material and drops it 2.5" onto roller transfer section, 42" x 83" return section which transfers material to a powered 36" x 138" flat-belt conveyor.

36" x 84" Gravity roller section.

Jet "JCDC-3 Dust Collector

3HP Motor @ 3,450 RPM

66 Gallon Drum Canister Capacity

Canister Filter length 38 3/8"

1-Hose Connection 8" Diameter

3-Hose Connection 4" Diameter

Steel Impeller