Friulmac "Idramat S/TC 4 WS-2500" Double End Tenoner

See attached quotation with additional details, note that not all quoted options necessarily apply

Trimming Unit B

Composed of one horizontal cutting spindle assembled on supporting column;

The supporting column is arranged for the assembling of a second scoring horizontal spindle;

Rotation speed, 7600 RPM

Motor capacity, 4 HP

Blade diameter, 125 mm/4.9" - 180 mm/7"

The measures are visualised on mechanical digital indicators; transmission by means of Poly V belt; the unit is assembled on a transversally movable table on precision linear guides; the table sliding movement is opposite with respect to the pieces feeding direction and it is driven by pneumatic cylinder; the working is done on "clamped piece".

Dust extraction:

Nr. 1 hole outside diameter                                 :

Required air speed                                              : 30 m/sec

Air consumption                                                   : 1220 m³/h

Special equipments on the units:

• No. 2 + 2 “B-8/B- horizontal spindle modification for hogging tools installation.

Haunching Unit I

• Composed of a movable body that slides vertically on precision linear guides, supporting an horizontal spindle provided with high speed bearings, it is driven by means of toothed belt, by electric motor.  The vertical movement of the unit driven by pneumatic cylinder;

  Rotation speed, 5,600 RPM

  The working is done on "clamped piece" positioned onto anti break out back up block.

  Dust extraction:

  Nr. 1 hole outside diameter                                       : 125x80 mm

  Required air speed                                                    : 30 mt/sec

  Air consumption                                                         : 1080 m³/h

  Compressed air consumption                                   : 150 lt/min

   

  Special equipments on the unit:

  • Fast tool change system for profiling unit (max. work-piece width ).

CNC Routing Unit J

• 
  Compose by a working unit adjustable in height on supporting column by means of screw TPN; the measures are visualised on mechanical digital read-out; The group column/unit is assembled on a movable base that slides in transversal and longitudinal sense with respect to the piece; both movements are driven by brushless motors and are interpolated by CNC; these movements are realised on precision linear guides by means of ball screw; The working unit is composed by an electro-spindle driven by inverter;

  The working movement is programmed in function of the tool rotation direction and it is done on “clamped piece”.

   

  Spindle rotation speed, 7,000 - 18,000 RPM

  Motor capacity, 6/10 HP with inverter

  Tool holding fixture, ISO-30

   

        Tool cutting circle (excluded from the supply):

  Speed (Rpm)	Diameter (mm)	Weight (Kg)
  5000-9000	150	4
  9000-12000	130	4
  12000-14000	100	2.5
  14000-18000	80	2.5

Open Station

At the outfeed of the machine:

SUPPORTING BRIDGE FOR FRONTAL HORIZONTAL BORING UNITS

AND FOR TOP VERTICAL UNITS MOD. PO-2/PN-2

=======================================================

Composed of rugged structures in horizontal and vertical electro-welded steel jointed, at the exit, to the machine base;

Both the supporting structures of the unit are provided with precision linear guides to allow the boring units manual positioning all along the bridges; the position is measured by magnetic strip.

Equipped with a steel table supporting the work pieces in exit provided with frontal and lateral reference fences, with a work pieces pushing system against fences and with a series of pneumatic pistons for the correct work piece positioning and for their clamping;

The base, supported on the bottom by pneumatic cylinders, is tiltable towards the inside of the machine for the processed elements outlet on the return or longitudinal outlet system.

On the vertical bridge:

CNC ROUTING UNIT FROM TOP

The unit slides along the top bridge, cross wise and in a axial sense with respect to the piece; all three movements are independent driven by brushless motors and are interpolated by CNC; these movements are realised on precision linear guides by means of high precision ball screw;

The routing unit is composed with a electro-spindles driven by inverter. The working movement is programmed in function of the tool rotation direction and it is done on “clamped piece”.  The axial movement is provided with feeler pin.

Spindle rotation speed, 12,000 - 18,000 RPM

Motor capacity (each), 4.7/7.4 HP with inverter

Tool holding fixture, ER 40

Cutter diameter, 3 mm/0.1" - 25mm/1"

Dust extraction                                     

Required air speed                                                       : 30 m/sec

Air consumption                                                             : 1840 m³/h

The CNC routing unit is equipped with a pneumatic drilling unit installed on one side. Fitting bit with mandrel, 3800 RPM.

Sound enclosure

Control cabinet