Supermax Tools Brush 36" Brush Sander

Features:

• Dozens of brush heads available to effectively sand a wide variety of applications.
• Raw Wood Sanding | White Wood Sanding

• Sealer Sanding | Primer Sanding | Scuff Sanding

• Break sharp edges

  • Open grain for even finish absorption
  • Blend out minor defects

• Removes raised fibers and grain (denib/defuzz)

  Degloss previously finished wood

• Clean reclaimed wood

• Wire brushing

• Distress (weathered/Southwest finish)

• Infinitely variable brush speed and conveyor feed rate allows for a wide variety of finishes

• Quickly change brush heads or abrasive loadings

• Fully adjustable tension rollers prevent stock slippage

• Reinforced steel conveyor bed with a poly conveyor belt

• Precision height adjustment

• Bristle Contact Gauge included

Technical Specs:

• Sanding Capacity
  • Maximum Width (in): 24, 36, or 49
  • Minimum Length (in): 10
  • Maximum Thickness (in): 11, varies with brush style
  • Minimum Thickness (in): 1/32
  Dimensions HxWxD (in):
  • 24” model: 52 x 46 x 35
  • 36” model: 52 x 58 x 35
  • 49” model: 50 x 71 x 31
  Brush (in):
• 9-11 in. typical diameterTypical Bristle Length:
• 1-1/2 – 3”Speed:
• ranged variable, 400-1200 RPM brushDust Hood:
  • 24” model: steel with hinged back, two (2)) 4” vacuum port, 1200 CFM min.
  • 36” model: steel with hinged back, three (3) 4” vacuum ports, 1800 CFM min.
  • 49” model: steel with hinged back, three (3) 4” vacuum ports, 1800 CFM min.
  Drive Motor (TEFC):
• 24″ & 36″ model: 5HP
• 49″ models: 7-1/2HPPower Requirements:
• 208-230V, 60HZ; 1 PH, 30 amp service; 3 PH, 20 amp serviceShipping Weight (lbs):
  • 24” model: 525 Lbs.
  • 36” model: 605 Lbs.
  • 49” model: 775 Lbs.
  Conveyor Motor: Direct Drive D.C motor, infinitely variable, 0-15 FPM
  • 24″ model: 100 in.-lb. torque
  • 36″ model: 100 in.-lb. torque
  • 49″ model: 200in.-lb. torque