Ask Seller
IMA "HKA" Contour Edgebander - Manual 
Ended
JMC Wood Manufacturing - Bridgeton, MO
Bridgeton, MO
- Starting Bid : $250.00 USD
- 0 Bid(s)
JMC Wood Manufacturing ( Closed #66402119 )
Excess machinery no longer required in continuing operations of JMC Wood Manufacturing in Bridgeton, MO
-
Item Location
13519 Northwest Industrial Drive, Bridgeton, MO 63044
-
Make
IMA
-
Model
"HKA"
-
Serial Number
18851
-
Year
2002
-
Phase
3 PHASE
-
Voltage
600VOLT
-
Inspection Date
By Appt. Only - Please Contact Mike Arnott - [email protected]
-
Final Removal Date
See home page for details
-
Estimated Dimensions
-
Estimated Weight
-
Seller Comment
-
Load Fee
95
-
Lot Notes
-
page views
243
IMA "HKA" Contour Edgebander - Manual
Designed for straight or curved (contour) edgebanding, 0.5 - 3 mm edgebanding thickness, 16 - 45 mm panel & banding height, 23 - 45 mm min. strip width; 100 mm min. panel width; 250 mm min. strip length; max. panel size of 2,800 mm x 1,200 mm.
0.5 Liter cap. "floating worktable" head/glue pot unit (hot melt); guillotine knife for PVC material (within floating head), internal/external radii.
Floating edgebanding head is clamped to panel to be processed; precut strip of edgebanding material is fed into glue head; operator guides head around workpiece; glue is directly applied to precut strip of edgebanding material up to end of strip.
Electrics supplied via overhead "JIB/Boom" mechanism allowing operator to freely move around workpiece; side mounted coil plate for easy access to edgebanding material.
Versatile glue head can be fixed to (1) side of table to allow operator to manually manipulate smaller pieces; during "fixed" mounted operation, coil material is drawn in automatically to infeed section of machine.
32" (800 mm) Dia. coil dispensing table, large worktable surface (approx. 36" x 36"); preselection counter for edgebanding material; (5) vacuum pads, 150 mm x 150 mm ea.; (1) vacuum pump with 6 cbm/Hr cap.; (1) pre-heating 600 Watt unit for pre-heating of PVC/ABS edges.
Complete with: Thermo-control for glue temperature, foot pedal control to initate automatic cycle, and used guillotine knife (mounted on Edgebander).
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginIf a load fee is established for an individual lot, that fee will include loading onto a flatbed truck (only) by the seller. Any individual lot without a load fee will be the buyer's responsibility to remove and load (at buyer’s expense).
Payment is due within 24 hours of auction close. Payments must be made via bank wire transfer for any amount above $1,500. Credit cards may be used up to $1,500 (3% processing fee). Please Contact Sabrina Burns with payment questions at 209-839-7707 Any sales tax exemption documents are to be emailed to [email protected] at time of purchase/invoice for tax exemption consideration.