Ask Seller
Homag "Cabteq S-250" Case Clamp (2022) 
Ended
Pladac Industries - Salinas, CA
Salinas, CA
- Winning Bid : $34,350.00 USD Sold
- 48 Bid(s)
- High Bidder: d****n
Late Model Homag Machinery - Salinas, CA ( Closed #64679706 )
Complete shop closure! Featuring 2022 Homag Sawteq B-200 Beam Saw, 2022 Homag Drillteq V-200 Vertical CNC Machining Center, 2022 Homag Cabteq S-250 Case Clamp, 2021 Biesse Jade 225 Edgebander, plus much more!
-
Pick Up Location
Salinas, CA
-
Make
Homag
-
Model
Cabteq S-250
-
Serial Number
0-306-73-0840
-
Year
2022
-
Phase
3 PHASE
-
Voltage
480 VOLT
-
Load Out Period
See Homepage
-
Estimated Dimensions
155" L x 28" W x 100" H
-
Estimated Weight
4,000 Pounds
-
Seller Comment
Euro Style Clamp!
-
Load Fee
A rigger is required. Buyer's Responsibility for Break-down, loading and removal.
-
Lot Notes
Please see video!
-
page views
1888
Homag "Cabteq S-250" Case Clamp (2022)
See video of machine in operation
- The CABTEQ has two speeds: an approach speed (rapid speed) and a pressing speed.
- At the touch of a button, the plates move from their starting position to the pressing position at rapid speed just before hitting the cabinet. The speed then switches to pressing speed.
- Depending on the cabinet type, the pressing force can be adjusted to different requirements at the controller.
- Each cabinet is pressed centrally and over the entire surface.
- Built-in sensors detect the carcasses before they hit the pressing areas. This means that carcasses are pressed more gently.
(1) Horizontal & (1) vertical interlocked pressure beam, each with electric push button control; 8-beam surface area eliminates need for pressure pads.
Working capacity: 5.85" - 97.5" (150 - 2,500 mm) Length; 9.8" - 27.5" (250 - 700 mm) depth, 5.85" - 55" (150 - 1,400 mm) height.
Motorized horizontal & vertical beams can position simultaneously or individually during setup, vertical & horizontal interlocking pressure walls, each with (8) individual beams move parallel & square to the clamp frame;
Two (2) Selectable clamping speeds of approx. 5 FPM (1.5 MPM) or 10 FPM (3 MPM) and adjustable pneumatic pressure regulator clutch system stops the beams at preset pressure resistance.
Features & Operation: Manual switch setting;adjustable dwell timer opens clamp automatically; operator control panel built into left side of clamp; virtually a "plug-in-play" machine.
Manuals
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginIf a load fee is established for an individual lot, that fee will include loading onto a flatbed truck (only) by the seller. Any individual lot without a load fee will be the buyer's responsibility to remove and load (at buyer’s expense). MachineryMax does not ship- All buyers responsible for their own freight - For freight quotes please contact your preferred broker, or contact Aaron, at Always Trucking 541-608-6532
Payment is due within 24 hours of auction close. Payments must be made via bank wire transfer for any amount above $1,500. Credit cards may be used up to $1,500 (3% processing fee). Please Contact Sabrina Burns with payment questions at 209-839-7707 Any sales tax exemption documents are to be emailed to [email protected] at time of purchase/invoice for tax exemption consideration