SCM Minimax sc4e Sliding Table Saw

VIDEO AVAILABLE

The Minimax SC 4E has a massive cast iron blade group, this large design lends extra stability to the main blade and scoring blade. The cast iron blade group tilts on two trunnions to lessen degradation over time, and the main blade and scoring blade raise independently of each other.

CAST IRON RIP FENCE KNUCKLE

The Minimax SC 4E has a thick, cast-iron knuckle, to which the extruded aluminum rip fence is attached. It rides on a large steel round bar, and is locked in placed with a cam design for maximum rigidity. It micro-adjusts into place via a rack and pinion design.

SCORING

The Minimax SC 4E comes standard with scoring. This allows you to not only accurately cut panels, but you can cleanly cut them too. This is important when cutting particle board, melamine, laminated panels, or anything else to which you want to apply some type of edge banding. If you are cutting solid wood, simply drop it below the table surface independentlyof the main blade. A 12” main blade capacity is featured without having to remove thescoring blade. The scoring is belt-driven from the main motor.

SEPARATE MITER GAUGE

The Minimax SC 4E comes with a separate miter gauge with two flip-stops. This way, for miter cuts, the operator can keep the main crosscut fence at 90° and use the separate miter gauge to do the angled cuts, saving time when mitering small panels.

EXTENSION TABLE AND SLIDER LOCK

The Minimax SC 4E features a sliding table lock which allows the slider to be locked when pulled away from the blade that makes loading panels much easier.

FLIP-STOPS AND HANDWHEELS

The Minimax SC 4E crosscut fence comes with two interchangeable flip-stops. Two handwheels are included with the Minimax SC 4E for the main blade and scoring blade operating movements.

STANDARD EQUIPMENT

•   Solid cast iron saw unit with double support trunnions

•   Aluminum sliding table and rail with hardened steel guide-ways

•   European-style rip fence with cam lock, micro-adjustable

•   Automatic self-braking motor

•   Two interchangeable flip-stops with miter gauge

•   Two interchangeable flip-stops with crosscut fence

•   Round steel guide bar for rip fence

•   Telescoping crosscut fence with two adjustable flip stops

•   Additional table on the sliding table for support of panels with large dimensions

•   Eccentric panel clamp

•   2-position sliding table lock

•   Table extension on saw out-feed

•   Scoring blade (Adjusted Independently of Main Blade)

•   Tool set and operator’s manual

•   “CSA” - rated electrical components

  DIMENSIONS (mm)

TECHNICAL SPECIFICATIONS

Listed specifications were taken from manufacturer's published information and is assumed to be correct but not guaranteed.  Bidder is encouraged to inspect the machine, call with questions or contact the manufacturer for more information.