Ask Seller
Northwood "SJ270-D" Dual Zone Stone CNC Saw Jet (Water Jet & 5-Axis Saw) 
Ended
Granite Source, INC Complete Shop Auction - Denver, CO (area)
Arvada, CO
- Winning Bid : $68,751.00 USD Sold
- 115 Bid(s)
- High Bidder: f****n
Granite Source, Inc. Complete Shop Auction - Arvada, CO ( Closed #57080872 )
Complete Shop Auction in Denver, CO metro area - Over 450 Lots including: 2018 Northwood "SJ270-D" Twin Table Stone Waterjet & 5-axis saw, 2016 Marmo Meccanicia "LCV Magnum" Stone Edge Polisher, Water Treatment Solutions "FP 630" Filter Press, 2019 Northwood "138EDS" 3-Axis CNC Stone machining Center, 2016 Northwood "138UFC" 3-Axis CNC Stone machining Center, (2) Bridge Cranes, JMM "B-350" Bridge Saw, Zoller "Smile 420" Tool Pre-Setter, Skyjack Platform Lift, Multiple Vacuum Lifts, Over 50 Lots of Tooling, Hundreds of lots of Granite and related Inventory.
-
Item Location
5525 W. 56th Ave Unit 400 Arvada, CO 80002
-
Make
Northwood
-
Model
"SJ270-D"
-
Serial Number
21210
-
Year
2018
-
Phase
3 PHASE
-
Voltage
480 VOLT
-
Inspection Date
See Homepage
-
Final Removal Date
See Homepage
-
Estimated Dimensions
36' x 14' x 10'
-
Estimated Weight
-
Seller Comment
-
Load Fee
A Rigger is required for this lot. Buyer is responsible for break down & loading.
-
Lot Notes
WOW...What a great machine...See Video!
-
page views
412
Northwood "SJ270-D" Dual Zone Stone CNC Saw Jet (Water Jet & 5-Axis Saw)
In addition to the saw-motor, the Saw Jet is equipped with an abrasive waterjet head from KMT Waterjet, and is powered by a 60,000 PSI Intensifier Pump. The garnet is fed from a pressurized reservoir to a motor-driven, metered feeder system proximate to the waterjet nozzle. The SawJet software automatically switches between the saw and waterjet as the condition demands, and blends the two cuts as a product of an easy-to-follow calibration routine. In addition, Northwood�s industry-leading StoneVision(tm) 3.0 software, coupled with Alphacam(tm) software by Vero Software, takes the difficulty and risk out of processing drawings or digitized data into machine toolpaths.
The Northwood SawJet integrates a complete run of high-pressure stainless steel piping. The piping lines are contained in a dual chamber energy chain, providing proper protection and control of each line. This system improves the life and reliable of the hp pressure lines.
Fanuc Servo Driven Ground Ball Screws
The Northwood SawJet is controlled by a FANUC Servo control system closely integrated with a 40mm ground ballscrew This combination is designed to provide years of trouble free operation and also provide the highest level of accuracy. Northwood�s interface software and machine control allow an operator to quickly load and run part programs, as well as perform other machine tasks. In addition, Northwood�s industry-leading StoneVision(tm) 3.0 software, coupled with Alphacam(tm) software by Vero Software, takes the difficulty and risk out of processing drawings or digitized data into machine toolpaths.
Mounted Camera system and calibration means for taking accurate slab photos
Bar Code Reader for quickly loading work programs and other information
Cleanout-system ready tanks and drain connections
Industrial air hookup with particulate filter and coalescing filter with auto-drains
Solenoid-actuated dual-side flood coolant for the saw blade
Single, industrial, fused, lockable, disconnect for all incoming power
Conduit wire-hose management system for all floor cabling
Remote machine control diagnostics
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginIf a load fee is established for an individual lot, that fee will include loading onto a flatbed truck (only) by the seller. Any individual lot without a load fee will be the buyer's responsibility to remove and load (at buyer’s expense).
Payment is due within 24 hours of auction close. Payments must be made via bank wire transfer for any amount above $1,500. Credit cards may be used up to $1,500 (3% processing fee). Please Contact Sabrina Burns with payment questions at 209-839-7707 Any sales tax exemption documents are to be emailed to [email protected] at time of purchase/invoice for tax exemption consideration.