Ask Seller
Homag "Optimat KAL 310/4/A20" Edgebander 
Ended
Complete Facility Auction - Ronkonkoma, NY 11779
Ronkonkoma, NY
- Winning Bid : $1,650.00 USD Sold
- 14 Bid(s)
- High Bidder: H****y
Island Woodworks - Ronkonkoma, NY ( Closed #56495801 )
Open House Inspection Period: October, 18 - 12PM - 5 PM & October, 19 - 7:30AM - 11:00AM 41 Howard Place, Ronkonkoma, NY 11779
-
Item Location
31 Howard Place, Ronkonkoma, NY 11779
-
Make
Homag
-
Model
"Optimat KAL 310/4/A20"
-
Serial Number
0-200-03-8275
-
Year
2005
-
Phase
3 PHASE
-
Voltage
480 VOLT
-
Inspection Date
See Homepage
-
Final Removal Date
See Homepage
-
Estimated Dimensions
20'L x 4'W x 6'H
-
Estimated Weight
-
Seller Comment
A rigger is required. Buyer's Responsibility for Break-down, loading and removal.
-
Load Fee
-
Lot Notes
Pedowitz Machinery Movers,Ray Brunelle, Lebanon, NJ 08833 Cell: 917-939-2975 [email protected]
-
page views
192
HOMAG KAL 310/4/A20 Edgebander (High Production):
0.4 - 20 mm Edge thickness cap., min. panel width 55 mm for panel thickness 12 - 22 mm & under; 100 mm for panel thickness over 22 - 60 mm.
Variable feed speed from 18 - 24 MPM (60 - 79 FPM); 80 mm feed track pads, motorized V-groove belt on top pressure beam.
Hot Melt Glue System "A 20" Quick-Melt Unit;Pressure roll section with (7) rollers, (1) large dia. driven & (6) idle rollers
Multi-purpose(1) coil/strip magazine for coil stock from 0.3 - 3.0 mm; Strip feeding for thin strip material & standard strip feeder for up to 20 mm solid wood.
Double end trim/snip (0.25 HP - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel.
Top/Bottom Rough Trim(1.35 HP -12,000 RPM motors); Motors supmerimposed (overlapping); SIKO digital counters for adjustments.
Top/Bottom Fine Trim(0.5 HP - 12,000 RPM); motors; tilting range fr 0° - 30°, superimposed (overlapping); SIKO digital counters for adjustments.
Top & Bottom Buffing Unit (0.25 kW - 2,850 RPM) each motor.
Line control with HOMATIC "NC 21" Industrial controllerfeatures functions in Windows environment.
SIKO Digital adjustments; electronic DC brakes on all trim motors, sound cabins for all trim workstations, adjustable outboard panel support with swing out arms for up to 800 mm.
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginIf a load fee is established for an individual lot, that fee will include loading onto a flatbed truck (only) by the seller. Any individual lot without a load fee will be the buyer's responsibility to remove and load (at buyer’s expense).