Serial # A0302/6877

3PH 230/460/480 Volt

This is a very rare 2 axis machine with light use in a small cabinet shop environment.

It can be programmed or software linked, with a cabinet making program (Cabinetvision), for drilling left to right but also for thickness. (This was an extra)

It was converted over to pre-glued dowels for an easier to maintain machine.

It is set up to work with a scanner for reading barcode labels to speed up production.

Its four (4) clamps will hold material that is loaded from both the front and from the top.

It can be set up for four (4) work zones though currently set up for two (2).

It is set up with 2 material sensors that have a time delay for automatic running of program once material is placed in its work zone. (This was an extra)

It is setup with a drawer program for doweling ½” drawer stock.

It can be set up to work with a remote monitor.

It is setup for network connection.

The control tower comes on a swivel caster base.

It has it own air nozzle built in.

Working Capacity: Width 3/4” – 49” (20 – 1245 mm), Ht. 1/2” – 2 3/8” (12 -60 mm)

Boring Capacity:  Depth 1 1/8” (28 mm), Ht. 1 3/8” (35 mm), set up for 8 mm dowels

Positioning speed of all working units at 160 MPM (525 FPM), boring & insertion capacity up to (60) dowels/Min.

High pressure patented "KOCH ELC" glue injection unit & dowel inserter head.
Complete with: Overhead vibrating hopper for dowel feeding, "air tight" pressurized 1:1 glue tank & "ELC" Electronic Glue Detection System (special patented "KOCH design" precision dosing valve w/digital adjustment).
 

CNC Control Windows 98 w/monitor built into free-standing operator control cabinet, menu driven screen for function control & graphic illustration of machine functions.

Comes with Manual, spare parts and Koch tool box.