Ask Seller
Laguna "Smart Shop II" CNC Router 
Ended
Late model Laguna machinery no longer required for operations
- Winning Bid : $22,150.00 USD Sold
- 96 Bid(s)
- High Bidder: g****s
Late Model Laguna CNC and LD4 lock dowel machine auction - Timnath, CO ( Closed #51086559 )
Late Model Laguna Smart Shop II and Laguna LD4 Lock Dowel Machine no longer required for operations.
-
Item Location
4760 Three Bell Pkwy. Timnath, CO 80547
-
Make
Laguna
-
Model
Smart Shop II
-
Serial Number
018053745
-
Year
2018
-
Phase
3 PHASE
-
Voltage
230 VOLT
-
Inspection Date
By Appointment only - Contact Thomas Aronson - [email protected] - 941-699-8717
-
Final Removal Date
June 16th - June 23rd, 2023 By appointment only
-
Estimated Dimensions
144" x 80" x 70" ( With out vaccum pump)
-
Estimated Weight
See photos and description
-
Seller Comment
Contact Mark at Streamline Crane Services, Inc - 970-689-2003 - [email protected] for rigging services
-
Load Fee
-
page views
1646
Laguna "Smart Shop II" CNC Router
48" x 96" moving gantry, fixed table design in a front-to-back configuration with a 6-zone vacuum table with T-slots including manual controls.
48" x 96" x 9.5" Axis travel with 12" clearance under the gantry, Speeds of 900 IPM, rapid travel with 600 IPM maximum cutting speed.
(1) 11 HP "HSD" spindle with (ATC), 9,000 - 24,000 RPM Range, Ceramic Spindle Bearings.
Automatic Tool Changer with (8) tool position tool rack Includes assorted tool holders, collets, and precision collet nuts.
25 mm heavy-duty HiWin HG Series linear bearings and rails on all axis rack. "Helical" rack-and-pinion drives on "X" and "Y" axis, and precision-ground ball screw drive on "Z" axis. Gantry is driven on each end (two "helical" rack-and-pinion drives on "Y" axis).
Spindle speed control through programming, Manual overrides of spindle speed and feed speeds during run. Centralized lubrication system for all axis, assorted tool holders.
Weg W22 15 HP @ 880 RPM Vaccum Pump included with CNC Router
Listed specifications were taken from manufacturer's published information and is assumed to be correct but not guaranteed. Bidder is encouraged to inspect the machine, call with questions or contact the manufacturer for more information.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginIf a load fee is established for an individual lot, that fee will include loading onto a flatbed truck (only) by the seller. Any individual lot without a load fee will be the buyer's responsibility to remove and load (at buyer’s expense).
Payment is due within 24 hours of auction close. Payments must be made via bank wire transfer for any amount above $1,500. Credit cards may be used up to $1,500 (3% processing fee). Please Contact Sabrina Burns with payment questions at 209-839-7707 Any sales tax exemption documents are to be emailed to [email protected] at time of purchase/invoice for tax exemption consideration.