Ask Seller
Biesse "Rover B 4.65 FT" CNC Router 
Ended
CNC no longer required for continuing operations
- Winning Bid : $7,601.00 USD Sold
- 12 Bid(s)
- High Bidder: R****h
Biesse CNC Router and two Busch Vacuum pumps - San Diego, CA ( Closed #48257893 )
Biesse CNC Router and two Busch Vacuum pumps - San Diego, CA
-
Item Location
3025 Beyer Blvd. Suite E-105 San Diego, CA 92154
-
Make
Biesse
-
Model
Rover B 4.65 FT
-
Serial Number
75463
-
Year
2006
-
Phase
3 PHASE
-
Voltage
460 VOLT
-
Inspection Date
By Appointment only - Contact Thomas Aronson - [email protected] - 941-699-8717
-
Final Removal Date
Must be picked up no later than May 5th, 2023 by 3 PM Pacific
-
Estimated Dimensions
300" L x 96" W x 96" H
-
Estimated Weight
14, 500 Lbs
-
Seller Comment
A rigger is required. Buyer's Responsibility for Break-down, loading and removal.
-
Load Fee
Rigger Only
-
page views
1121
Biesse "Rover B 4.65 FT" CNC Router
See Video of Machine in action
Flat table with "Matrix" phenolic surface for "Nested Base Machining" 50" x 256' table area
Working cap.: "X" Axis 256" (6,500 mm), "Y" axis 49" (1,260 mm), "Z" axis stroke is 7.2" (200 mm), max material thickness 5.9" (150 mm). Positioning Speed: "X" & "Y" axis is 262 FPM (80 MPM), "Z" axis is 98 FPM (30 MPM); helical rack and pinion drive on "X" axis & ballscrew on "Y" & "Z" axis.
Routing: (1) 10 HP (7.5 kW) Air cooled electro-spindle with HSK-F63 adaptor, variable speed from 1,000 - 20,000 RPM; (1) 10-position ride along tool changer for "on the fly" ATC.
(2) independent working areas; (14) external pop-up reference pins with (6) on the back of the table, (4) on the front of the table, (2) on the RH side, (2) on the LH side. Boring Unit with: (1) 2.5 HP (1.7 kW) - 4,000 RPM motor: (12) independent vertical spindles, horizontal spindles with (2+2) in "X" axis & (1+1) in "Y" axis; (1) 120 mm dia "X" axis grooving saw (grooving saw typical but not verified).
Vacuum pumps NOT Included. (Listed in separate lots)
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.
Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.
Please log in to view the bid history
Login
Payment is due within 24 hours of auction close. Payments must be made via bank wire transfer for any amount above $1,500. Credit cards may be used up to $1,500 (3% processing fee). Please Contact Sabrina Burns with payment questions at 209-839-7707 Any sales tax exemption documents are to be emailed to [email protected] at time of purchase/invoice for tax exemption consideration.