Seller will load machine onto a flat bed or trailer on the date the riggers unload the new machine for no charge.  if buyer cannot pick up on that date it will be the buyers responsibility to load or hire a rigger to load at the buyers cost.  Expected date is May 8th 2023 but this could change if the new machine arrives late.

5' x 12' Flat Table "Bridge Gantry" machine with User-Friendly "S/C Tech" "MATRIX" grooved phenolic vacuum table. 

"X" Axis is 145" (3,100 mm), "Y" axis 61" (1,550 mm), "Z" axis stroke is 9.6" (243.8 mm), max. material thickness of 3.9" (99 mm).

"X" Axis is 236 FPM (72 MPM), "Y" axis is 203 FPM (62 MPM), "Z" axis 82 FPM (25 MPM);

The head travels via AC brushless drives & THK linear motion guides on all axes.

S/C Tech MATRIX grooved phenolic vacuum table for easy vacuum pod placement; pneumatic locator/positioning pins.

(1) 12 HP (9 kW) High speed electro-spindle router with "HSK F 63" adaptor; constant duty, variable speed from 1,250 - 24,000 RPM, RH or LH rotation.

(1) 10-Position ATC rack located at the end of machine.

PC Front-End with WEEKE "PC 85T" + Windows "XP" + WoodWOP 5.0 operating system.

17" TFT Color graphic monitor, keyboard for data entry, PC 85T hand control pendant; CD R/W & floppy drives, EtherNET interface for LAN connection to office PC, RS-232 serial interface, USB ports.

"BECKHOFF" Programmable logic control for (3/4) axes, linear, circular & helical interpolation; the controller is contained in a separate free-standing, dust-free control cabinet that can be placed at either the LH or RH side of the machine.

(4) Vacuum pumps;

separate control cabinet.

Boring unit with 3.6 HP (2.7 kW) motor, (7) Independent vertical spindles programmable variable speed from 1,500 - 7,500 RPM. 

The information provided in this lot was gathered from literature, internet & physical inspection.  It is thought to be accurate; but not guaranteed.  Bidders are urged to use the open house or private inspection periods to inspect and verify.