Fully Loaded Machine!  Storeteq Ready Machine!  Storeteq in photo not included.

KEY FEATURES

>Power concept for positioning two strips with different cross cut at the same time saving cross cut cycles

>Cadmatic 5.0 control – Easy to understand, Intuitive machine control. Moving graphic on the control walks the operator through even the most complex cutting pattern

>When cutting multiple cross cut strips with the same cuts the power clamp locks to the main fence so overlapping parts in a clamp are not an issue.

>Program fence with rack and pinion drive for quick work piece positioning and fast cycle times.

>Touch-free, magnetic measuring system – precise and impervious to dust and wear.

>Holzma patented central side pressure device integrated into saw carriage.  Working from below the machine bed, the side pressure device can align the thinnest sheets.

>Rugged Pressure beam with minimum opening for blades insures great edge quality.

>Rack and pinion saw carriage drive for low maintenance, dependability, and productivity

>Optimized chip extraction to help keep the sheets and area clean

>Air tables for easy material handling

>UL approved electrical cabinet and components

>Trim Breaker Bar conveniently located for easy disposal of trims

>Air Jets at Cut Line

• Additional Clamp at 2665mm from the right angle fence
• Data Linking for HOMAG Storage System. Complete communication interface between saw and stock control system.
• Extension of Cadmatic for the Storage System to control the saw.
• Teleservicenet Shared – Linking of the saw to a HOMAG production cell which allows for additional e-service possibilities. A fast and high-performance remote maintenance access by secured VPN connection via the internet
• Data transfer via network and USB port. > Transfer of optimized data (SAW files) to the saw. Office (production planning workstation) can access the current program sequence in the CADmatic control to get answers to the following questions:

  + Which job is currently being cut?

  + How long will this job still take?

  + Which job will be cut next?

 + Which jobs have already been cut today (history)?

• Label printing software for graphically informative labels (edge data and part drawings on label)
• Turbo Grooving for grooving in both passes of the saw carriage (forwards and back)

Specs:

Main Saw Motor 9.2 kW (12 HP)

Scoring Saw Motor 1.1 kW (1.5 HP)

Projection of Main Saw Blade 80 mm (3.15")

Saw Carriage Speed forward 0-120 mm (0-393 fpm)

Saw Carriage Speed reverse 120 mm (393 fpm)

Program Fence Speed forward 25 m/min (82 fpm)

Program Fence Speed reverse 80 m/min (262 fpm)

Panel Size – maximum 3800 mm x 3700 mm (149.61" x 145.67")

Panel Size – minimum 50 mm x 50 mm (1.97" x 1.97")

Cutting Length 3800 mm (149.61")

Working Height  920 mm (36.22")

3 Air Tables 1800 mm x 650 mm (70.87" x 25.59")

1 (one) Power Clamp "Practive" (not raiseable)

3 (three) standard clamps with lifting element      

4 (four) standard clamps without lifting element   

Operating Voltage 480 Volts / 3 Phase / 60 Hz

Total Connected Load 14.3 kW

Amperage (Nominal) 25.6

Amperage (recommended prefuse protection) 32

Air Volume 3300 m3/h (1942 cfm)

Air Velocity 26 m/sec (85 f/s)

Dust Connection Diameter Pressure Beam 140 mm (5.51")

Dust Connection Diameter Saw Carriage 160 mm (6.30")

Air Pressure Required 102 psi / 7 bar

Air Consumption / Volume 150 NL/min / 5.25 cfm

Main Blade 350 mm x 4.4 mm x 60 mm -  Diameter 350 mm (13.78")

Scoring Blade 200 mm x 4.45 - 5.25 mm x 45 mm – Diameter 200 mm (7.87")