0.4 - 8 mm/0.016 - 0.3125" edgebanding thickness

0.375 - 2.375" panel height

5.5" minimum panel length

2" minimum panel width

20" minimum distance between panels

Variable feed track speed, 36 and 52 FPM

Startouch controller

     12" touch screen

Infeed fence with manual adjustment, with digital indicator

Pneumatic panel spacing device

Two (2) motor premill station

     3 HP motors operating at 12,000 RPM

Glue and banding application station

     3 mm guillotine capacity

     Teflon-coated glue pot, 3 pound capacity

     Reversible glue roller

     Servo driven pressure section with four (4) rollers (1 powered, 3 idle)

Two (2) motor end trim station

     0.5 HP motors

     Automatic tilting with two (2) preset positions

Top/bottom flush trim station

     0.8 HP motors operating at 12,000 RPM

     Two (2) position pneumatics

     Vertical copy shoes

Top/bottom fine trim station

     1 HP motors operating at 12,000 RPM

     Vertical and horizontal copy devices

     Servo driven motor to adjust from one material thickness to another via controller

Two (2) motor corner rounding station

     0.8 HP motors

     Front and lateral copy devices

     Pneumatic blowers

     Adjustment from thin tape to 3 mm PC via controller

Top/bottom profile scraping station

     Pneumatic in/out positioning via controller

     Horizontal and side copy wheels

Top/bottom glue scraping station

     Vertical rotating copiers

     Pneumatic blowers

     On/off pneumatic exclusion

Top/bottom buffing station

     0.25 HP motors operating at 3,000 RPM

Hot air blower station

Electronic positioning on top pressure beam

Lighted sound enclosure