Ask Seller
Weinig/Raimann/Dimter - Optimizing Cut-off System 
Ended
O'hair Shutters - Lubbock, TX
- Winning Bid : $52,650.00 USD Sold
- 39 Bid(s)
- High Bidder: a****h
O'Hair Shutters in Lubbock, TX - World Renowned Shutter Manufacturer ( Closed #43054962 )
Complete Weinig/Dimter/Raimann automated cut-line, Weinig "Powermat 1000" Moulder, (2) RF Glue Presses, (2) Cresswood Grinders, (2) Black bros. glue spreaders, (4) Weinig Profimat moulders, (2) Complete Finishing Lines, Mack Dust Collector, Mereen Johnson "424" Gang Rip Saw, (2) Hyser Fork lifts, and much, much more.
Inspection Period: Please schedule with Eric Beach - [email protected] or 704-608-9830 (text preferred). This is an operational facility and MUST be scheduled.
Rigger info: Professional Movers & Rigging - John Webb - 806-745-7671 - [email protected]
-
Item Location
2001 N Avenue P, Lubbock, TX 79403
-
Make
Weinig/Raimann/Dimter
-
Model
-
Serial Number
-
Year
2005
-
Phase
3 PHASE
-
Voltage
460 VOLT
-
Inspection Date
See Home Page for Inspection Details
-
Final Removal Date
See Home Page for Removal Date
-
Estimated Dimensions
135" x 96" x 84"
-
Estimated Weight
-
Seller Comment
-
Load Fee
A rigger is required. Buyer's Responsibility for Break-down, loading and removal.
-
page views
1391
Weinig/Raimann/Dimter - Optimizing Cut-off System
Station 1 - Luxscan Board Scanner
- Defect board length scanner
- (2) 9" x 42" Powered feed belts
- Roller hold-downs on infeed/outfeed
Station 2 - Powered Outfeed/splitting station
- Splits scanned boards to the L or R scanner
- (18) 3-1/2" x 20" Powered rollers
- (5) LH 3-1/4" Rubber cross transfer chains
- (5) RH 3-1/4" Rubber cross transfer chains
- L & R Overhead brushes
Station 3 - Dimter "Opticut 350-4" Optimizing Saw - Qty (2)
- Right-to-Left feed; 12" max. & 1" min. board width cap., thickness from 3/4" - 5-1/2" max., board length from 16" - 16' max., outfeed length can be as short as 7" to 16' max. cuts softwood or hardwood.
- 10 HP - 3,600 RPM Arbor motor, 22" dia. (30 mm bore) saw blade; 10 HP Servo drive feed motor accelerates material up to 790 FPM, (3) pneumatically operated top rollers and (1) driven bottom drum roller positively feed the board to the saw, then stop quickly for saw to make precision cut.
- Controls all system functions including Measuring, Optimizing, Cutting, and Sorting.
Station 4 - LH & RH Kicking Stations
- Center powered conveyor belt, scrap, 10" x 72'L
- LH & RH Powered belt conveyors, 10" x 66'L (each
- (14) LH & (14) RH Kicking stations
- (1) Hytrol double belt powered conveyor, (2) 30" x 192" belts
- (1) Hytrol double belt powered conveyor, (2) 24" x 192" belts
- (3) Hytrol double belt powered conveyors, (2) 18" x 192" belts
Station 5 - Hytrol Powered Belt Conveyors - Scrap
- (3) 30" x 92"
- (1) 28" x 200"
- Various sized part baskets included
This lot is part of the complete cut-line lots 003-007
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532 or or John @ NCL Trucking @ 615-452-7651 . Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa, MasterCard, or American Express (3% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice. Applicable State & local tax will be added in.