Ask Seller
Morso "KSM" half lap router 
Ended
Items located in Lafayette, CO
- Winning Bid : $1,001.00 USD Sold
- 18 Bid(s)
- High Bidder: j****z
Woodworking Machinery Auction - Denver, CO ( Closed #42728118 )
Watson Mills & Design in Denver, CO is offering the machinery they no longer are using for their continued production of their high end cabinetry and millwork. Biesse edgebander, Diehl rip saw, DMC sander, Taylor clamp carrier, and more will sell to the highest bidder.
-
Item Location
-
Make
Morso
-
Model
KSM
-
Serial Number
-
Year
2002
-
Phase
1 PHASE
-
Voltage
230 VOLT
-
Inspection Date
See main page for inspection information.
-
Final Removal Date
See main page for loading dates
-
Estimated Dimensions
24" x 20" x 46"
-
Estimated Weight
200 pounds
-
Seller Comment
-
Load Fee
25
-
page views
954
The KS Range of routing machines.
To create the half-lap when making cross-half joints.
Morso manufacturing machinery to produce this difficult joint accurately and efficiently. The set of machines consist of one notch Guillotine from the N-range and a router from the KS-range.
There are machines to suit each level if production as required- from the small manufacturer to large mass production. Set-up time (less than 5 mins) with all machines is quick and simple, ideally made using a template. Changes in profiles require no adjustments, providing the overall sizes remain the same. Capacity, as always, depends on the operator.
Typically joints are produced in less than 45 seconds...the quality of the joint is unbeatable.
The KS mini requires very little workshop space. It can remain free-standing as supplied, or be detached from it's frame to be bench mounted.
The KS-Mini with the NF or NFX guillotine is the perfect solution to producing the Half-Cross Joint as found in Georgian window bars. It is used for both "Plant on Cassettes" or "Rebated bars".
The Morso KS mini routing machine is constructed for routing grooves 6mm-12mm. The KS routing machine will rout grooves up to 26mm wide and 20mm deep.
Technical information.
Length 660mm
Width 460mm
Height 1200mm
Nett weight 49kgs
Pneumatic Air pressure 6-8 bar
Cutting height max. 55mm
Cutting width max. 50mm
Max. routing width 12mm
Motor Single phase 0.860kw/29000rpm
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment.
For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532 - [email protected] email is preferred and quickest.
Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased.
Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa MasterCard, or American Express (3% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.