Ask Seller
Ritter "R246" Double row line drill 
Ended
Complete shop closure in Waterford, CA
- Winning Bid : $4,150.00 USD Sold
- 50 Bid(s)
- High Bidder: H****1
Complete shop machinery liquidation - Waterford, CA ( Closed #42001699 )
Loading will take place Tuesday, Wednesday, & Thursday Nov 15th, 16th, & 17th.
If you are purchasing a machine that requires rigging you will have until Nov 30th to pick up your machine. Rigging times are available by appointment with the seller. It is the buyers responsibility to hire a rigger or send in their own crew and equipment for proper removal of machinery.
-
Item Location
Waterford, CA
-
Make
Ritter
-
Model
R246
-
Serial Number
1026
-
Year
2001
-
Phase
3 PHASE
-
Voltage
230 VOLT
-
Inspection Date
See main page for inspection information.
-
Final Removal Date
-
Estimated Dimensions
52" x 60" x 60" machine - 5' extension tables on each side
-
Estimated Weight
1000 pounds
-
Seller Comment
-
Load Fee
100
-
page views
1029
This is a heavy duty dual head line boring machine.
Two 23-spindle gear driven drill heads that drill from the bottom on 32 mm centers.
Traveling back fence extensions with adjustable position material stops.
Two machined steel worktable surface.
Head runs on linear bearings.
3-position drill head stroke control turrets.
(2) 23-spindle 32 mm boring heads that bore vertically from the bottom
Precision drill head carriage guide rail system
Each head powered by 3 HP motor
3,450 RPM spindle speed
5″ minimum between heads, 24″ maximum
fixed front row; adjustable rear row and back fence adjustable by lead screw
digital readout for distance between heads
(2) 8″ wide x 49″ long machined steel worktable surface
0 to 1-1/2″ drill stroke with 3 position turret for preset depths
72″ traveling back fence with (2) adjustable stops
0 to 3″ back fence offset from rear drill row centerline
(2) 53″ traveling back fence extensions with (2) adjustable position material stops per extension
(8) adjustable pneumatic hold downs
above table tool change position
accepts 57 mm long tooling with 10 mm straight shanks
single or double row cycle drill head stroke control
foot actuated drilling cycle
magnetic motor controls
Floor area: without extensions – 72″ x 60″, with extensions – 188″ x 60″.
Technical Specs:
Drill heads (2) 23-spindle gear driven drill heads
Drill centers 32mm
Drill head spacing 4” to 22” apart with a digital read out
Spindles (24) right hand, (22) left hand, 10mm chuck
Drilling depth 3-position with control turret
Pneumatic hold downs (4) adjustable position front head
Controls foot actuated drilling cycle
Motor starter magnetic motor controls
Electrical 3 phase, 230 volt, 60 hz, 1725 rpm motor
Machine weight 3,040 lbs.
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.
Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment.
For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532 - [email protected] email is preferred and quickest.
Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased.
Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.