Ask Seller
CNC Factory "Python XPR" CNC Router - Load & Unload - Ink-Jet Labeling - (2019) 
Ended
Like NEW! Less than (20) parts ran on this machine- El Monte, Ca
- Winning Bid : $40,400.00 USD Sold
- 123 Bid(s)
- High Bidder: r****s
CNC Factory "Python XPR" CNC Router - Load & Unload (2019) ( Closed #39752353 )
Located in Greater Los Angles Area.
-
Item Location
South El Monte, CA
-
Make
CNC Factory
-
Model
"Python XPR" CNC Router - Load & Unload (2019)
-
Serial Number
-
Year
2019
-
Phase
3 PHASE
-
Voltage
230 VOLT
-
Inspection Date
By appointment only, contact Eric Beach, [email protected] or (704) 608-9830
-
Final Removal Date
-
Estimated Dimensions
See Description
-
Estimated Weight
10,000 Lbs
-
Seller Comment
A Rigger is required for this lot. Please contact Marco Salinas @ 323-533-0614
-
Load Fee
-
page views
3534
CNC Factory "Python XPR" CNC Router - Load & Unload - Ink-Jet Labeling - (2019)
5' x 10' single table, phenolic table is machined with a square "MATRIX" grid pattern for fixturing parts, electronically controlled select-able vacuum zones, pneumatic pop-up pins for manual and automatic material placement. Machine is 174" L x 106" W x 100" H, dimensions for infeed and outfeed listed below.
X-axis 122" (3,099 mm), Y-axis 62” (1,575 mm) , Z-axis stroke is 12" (305 mm), X & Y-axis 233 FPM (71 MPM), Z-axis 82 FPM (25 MPM), closed loop AC Servo drive system driving precision helical rack & pinion in "X" & "Y" axis & ground ball screw in "Z" axis, all axes ride on extra large precision profile linear guide ways.
One (1) 12 HP "HQD" electrospindle with ISO 30 adaptor, quick change, 1,000 - 24,000 RPM, (1) 12-position automatic tool changer (ATC) mounted on the head for "on the fly" tool changes, touch-off device mounted at front of table. Pneumatic duct collection blast gates. Sound enclosure.
On-board traveling ink-Jet Labeling system for on-the-fly part labeling
Auto unloading system with pusher arm (rake), integrated dust collection, bottom-mounted dust plenum on outfeed, automatic dust blast gates, centralized lubrication system.
Infeed scissor lift: 120" x 64" x 36", 17" - 36" lift height (w/o pit), hydraulic pump, photo-eye auto adjustment, foot pedal control.
Outfeed powered belt: 140" x 72" x 40", dust extraction at beginning & end of belt.
Separate control cabinet with: "SYNTEC 4E 21” graphic industrial control center with hand held controller, 48" L x 22" W x 70" H
(2) CNC Factory Rotary Vane Vacuum Pump
5.5 Kw (7.5 HP), 1140 RPM.
Max flow 250 m3/h, max vacuum -85 kpa.
Installed and extra tooling and tool holders
Assorted accessories
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532 or or John @ NCL Trucking @ 615-452-7651 . Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa, MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice. Applicable State & local tax will be added in.