5' x 10' Flat Table "Bridge Gantry" machine with User-Friendly "S/C Tech" "MATRIX" grooved phenolic vacuum table. 

"X" Axis is 122" "Y" axis 61" (1,550 mm), "Z" axis stroke is 9.6" (243.8 mm), max. material thickness of 3.9" (99 mm).

"X" Axis is 236 FPM (72 MPM), "Y" axis is 203 FPM (62 MPM), "Z" axis 82 FPM (25 MPM);

The head travels via AC brushless drives & THK linear motion guides on all axes.

S/C Tech MATRIX grooved phenolic vacuum table for easy vacuum pod placement; pneumatic locator/positioning pins.

(1) 12 Kw (16 HP) High speed electro-spindle router with "HSK F 63" adaptor; constant duty, variable speed from 1,250 - 24,000 RPM, RH or LH rotation.

(1) 13-Position Rotary ATC located at the end of machine.

Boring unit with 3.6 HP (2.7 kW) motor, (12) Independent vertical spindles with "Quick Change" drill bit holders; programmable variable speed from 1,500 - 7,500 RPM. 

17" TFT Color graphic monitor, keyboard for data entry, PC 85T hand control pendant; CD R/W & floppy drives, EtherNET interface for LAN connection to office PC, RS-232 serial interface, USB ports.  Woodwop 7 Installed.

(2) Vacuum pods for load/unload, 52" roller top on infeed side of machine.

Infeed scissor lift, 60" x 144" roller top, fork lift cut-outs, (2) alignment posts, 21" max bunk height as configured (could be increased if lift is pit mounted).

61-1/2" x 162" Powered out-feed belt, top & bottom dust extraction.

(4) Becker Vacuum Pumps allowing (8) independent zones.

The information provided in this lot was gathered from literature, internet & physical inspection.  It is thought to be accurate; but not guaranteed.  Bidders are urged to use the open house or private inspection periods to inspect and verify.

See PDF Attachment for Complete specs and footprint