Ask Seller
Sky Jack Scissor lift 
Ended
Complete counter top shop liquidation - Salt Lake City, UT
- Winning Bid : $4,800.00 USD Sold
- 57 Bid(s)
- High Bidder: s****6
Complete counter top shop liquidation - Salt Lake City, UT ( Closed #38961949 )
Top Haus in Salt Lake city is retiring and selling all machines that they used to build custom counter tops. Vertical panel saws, counter top saws, post formers, table saws, sink cutout saws....100 lots
-
Item Location
Salt Lake City, UT
-
Make
Sky Jack
-
Model
SJIII 3226
-
Serial Number
-
Year
Unknown
-
Phase
1 PHASE
-
Voltage
110 VOLTS
-
Inspection Date
See main page for inspection information.
-
Final Removal Date
See main page for loading dates
-
Estimated Dimensions
-
Estimated Weight
4200 pounds
-
Seller Comment
-
Load Fee
100
-
page views
1874
New batteries were installed approximately six months ago
Work Height 32’ (9.75 m)
Raised Platform Height 26’ (7.92 m)
Lowered Platform Height 45” (1.14 m)
Overall Width 32” (0.81 m)
Overall Length 91.5” (2.32 m)
Stowed Height (Rails Up) 84.7” (2.15 m)
Stowed Height (Rails Down) 70.6” (1.79 m)
Platform Width (Inside Dimension) 28” (0.71 m)
Platform Length (Inside Dimension) 84” (2.13 m)
Extension Deck (Roll Out) 3’ (0.91 m)
Ground Clearance (Stowed) 3.5” (8.89 cm)
Ground Clearance (raised) 0.75” (1.90 cm)
Wheelbase 69” (1.75 m)
Weight 4,135 lbs (1,876 kg)
Gradeability 30%
Turning Radius (Inside) 50” (1.27 m)
Turning Radius (Outside) 108” (2.74 m)
Lift Time (With Rated Load) 56 sec
Lower Time (With Rated Load) 42 sec
Drive Speed (Stowed) 2.4 mph (3.9 km/h)
Drive Speed (Raised) 0.7 mph (1.1 km/h)
Maximum Drive Height Full Height
Capacity (Overall) 500 lbs (227 kg)
Distributed Capacity (Main Platform) 250 lbs (113 kg)
Distributed Capacity (Extension Deck) 250 lbs (113 kg)
Local Floor Load (With Rated Load) 130 psi (897 kPa)
Overall Floor Load (With Rated Load) 235 psf (12 kPa)
Maximum # of Persons 2
Wind Rating 28 mph (12.5 m/s)
Tire Type Solid, N/M
Tire Size 16 x 5 x 12
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.
Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment.
For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532 - [email protected] email is preferred and quickest.
Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased.
Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.