Features:
• With the triple head wide belt sander, you can accurately heavily sand your stock with the first steel &
second rubber drum head and with the third combination head, you can give an unlimited fine finish.
• Rugged heavy-duty sheet metal construction designed for durability usage.
• Powerful industrial motors drive sanding and auto infeed smoothly.
• Infeed and outfeed are spring-loaded hold down rollers to ensure positive feeding without sanding mark.
• Combination platen & drum sanding head for best sanding choice such as:
• With the platen up, the sander functions as a drum only machine, for sanding with a 40 ~ 100
grit belt.
• With the platen and drum same level, intermediate and final finishing is possible, using a grit of
120 ~ 180.
• With the platen down (below drum), used for the fine finishing or lacquer sealer sanding, with
180 ~ 600 grit.
• Sanding platen with a quick release and lock down design for easy removal or loading of graphite platen.
• Computerized thickness adjustment control with accurate digital readout, just key in the size desired and
automatic table movement for sanding thickness within 0.005” accuracy.
• Large size diameter contact drum is dynamically balanced rubber covered spiral grooves, designed to
provide considerable advantages for the effective removal of material.
• Special rubber feed belt for safe non-slipping, transporting the workpieces.
• The abrasive belts are tracked by oscillating cylinders linked to the upper roller. The edge of the belt is
detected by electric eye sensor, which in turn controls the air supply to the position via solenoid value.
Also, one limit switch is located on each end top roller of the sandpaper for quick stop in case of the
event of belt breakage.
• Main table designed with the convenient leveling adjustment which ensures greater stability with
excellent tolerance providing variable from 0” ~ 5” range sanding thickness.
• 4 heavy-duty jack screws power conveyor table elevation

Max. Working Width 42"

Max. Working Thickness 5"

Sanding Belt Dimension (W x L) 43" x 75"

Dust Collection Hood (Diameter x Holes) 8" x 3

Main Motor 40, 30, 30 HP

Feed Motor 5 HP

Table Raising / Lowering Motor ½ HP

Variable Feed Speed (FPM) 28 ~ 30

Working Air Pressure 7 CFM

Exhaust Volume Required 12360 CFM

7700 LBS

The information provided in this lot was gathered from literature, internet & physical inspection.  It is thought to be accurate; but not guaranteed.  Bidders are urged to use the open house or private inspection periods to inspect and verify.