× Bidding has ended on this item.

Cabinet Crafterz - Atlanta, GA (Closed #35660384)

Cabinet Crafterz in Atlanta, GA is offering their excess machinery to make room for the arrival of new machinery!

Terms & Conditions
Value Added Service Information
15.00%  Buyer's Premium
This Auction Uses Proxy Bidding.
Ended

SCMI "Olimpic S1000-T-ERL" Edgebander - Pre-mill & Corner Rounding

Late Model Machinery - Atlanta, GA

  Lot # 001
Listing Image
2022-05-25 10:44:15 PT 2022-05-25 10:44:15 PT America/Denver SCMI "Olimpic S1000-T-ERL" Edgebander - Pre-mill & Corner Rounding Edge Capacity, 0.4 to15 mm (0.016to 5/8)for strip feeding. Panel Capacity,min. width50 mmand 140 mm min. length, (2.0 and 5-1/2). Panel thickness min./max. 8 - 60 mm (3/8 - 2-3/8). Adjustable In-feed Fence: Manually pre-set with digital indicator andpneumatic panel spacing device. Pre-Milling Station, RT-E: Spindles 2 x 5.25 HP, 12,000 RPM, (1) with PLC controlled jump action andmanual digital indicators positioning andDiamond Cutter-heads. Automatic Strip Coil Feed Magazine: For straight edges and 3 mm guillotine for coils. Gluing Station, Vc/1000: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed.Heat-up time approx. 10 Minutes Pressure Section: Servo motor positioning, (4)pressure rollers, first larger, Teflon coatedand powered. End Trimming Station K-SEL:Front rear 2 x 0.5 HP, 12,000RPMmotorsmounted on THK guides,swivels 0 - 15, rapid set up between straight and angled cutting with the automaticswivel cylinder. Flush Trimming Unit, Rsp: Top/Bottom, 2 x 1.5HP, 12,000 RPMwith 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning. Bevel/Radius TrimmingUnit, Ri/S: Programmable, servo motorpositioning,2 x 1.0 HP - 12.000 RPMmotorsfor change-over on the fly. Corner Rounding / Trimming Unit, Round-K: For additional top bottom trimming of linear an/orvertical leading trailing corner when edgebanding all (4) sides,2 x0.8 HP - 12,000 RPM motor.Comes with (2) pre-set pneumatic positions to allow to go from thick to thin pvc automatically. Profile Scraping Unit RAS/1000:Top/Bottom with (2) indexedmanual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning. Glue Scraping Unit, Rca/2c: Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. Buffing Unit SPN: Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12. Hot Air Unit:Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thickpvc edging materials that my be lost during the edge scraping process. The information provided in this lot was gathered from literature, internet physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify. Unknown
Description

Edge Capacity, 0.4 to 15 mm (0.016 to 5/8") for strip feeding.

Panel Capacity, min. width 50 mm and 140 mm min. length, (2.0" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8").

Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device.

Pre-Milling Station, RT-E: Spindles 2 x 5.25 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning and Diamond Cutter-heads.

Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils.

Gluing Station, Vc/1000: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Minutes

Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered. 

End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder.  

Flush Trimming Unit, Rsp: Top/Bottom, 2 x 1.5 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning.   

Bevel/Radius Trimming Unit, Ri/S: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly.

Corner Rounding / Trimming Unit, Round-K: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. Comes with (2) pre-set pneumatic positions to allow to go from thick to thin pvc automatically.

Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning.

Glue Scraping Unit, "Rca/2c": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean. 

Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12°.

Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.

The information provided in this lot was gathered from literature, internet & physical inspection.  It is thought to be accurate; but not guaranteed.  Bidders are urged to use the open house or private inspection periods to inspect and verify.

Additional Information
  • Located 6595 Peachtree Industrial Blvd ste b, Peachtree Corners, GA 30092
  • MAKE SCMI
  • MODEL "Olimpic S1000-T-ERL"
  • SERIAL NUMBER AH/116460
  • YEAR 2012
  • PHASE 3 PHASE
  • VOLTAGE 230 VOLT
  • INSPECTION DATE Open House - Monday May 23, 2022 - 8AM - 3PM - No appt. needed.
  • FINAL REMOVAL DATE June 3, 2022
  • ESTIMATED DIMENSIONS 256" x 36" x 72"
  • ESTIMATED WEIGHT 6,500 Lbs
  • Value Added Service Info Aaron @ All-Ways Trucking @ 541-608-6532 or John @ NCL Trucking @ 615-452-7651
  • Load FEE A rigger is required. Buyer's Responsibility for Break-down, loading and removal.
  • Lot # 001
  • System ID # 35772403
  • End Date
  • Start Date
  • 884 Page Views
Value Added Service Options
CONTACT ALWAYS TRUCKING 541-608-6532 $0.00 USD
CONTACT LOCAL RIGGER $0.00 USD