Ask Seller
SCMI "Olimpic S1000-T-ERL" - Pre-mill & Corner Rounding (2014) 
Ended
Zorn Unlimited - Complete Plant Closure - Paramount, Ca
- Winning Bid : $31,160.00 USD Sold
- 132 Bid(s)
- High Bidder: j****d
Zorn Unlimited - Complete Plant Closure- Paramount, CA ( Closed #33136012 )
Late Model Machinery located in Los Angeles, CA metro area! Featuring: 2016 Biesse RoverA FT 1224 CNC Load/Unload w/ Labeling, 2014 SCM Olimpic S1000 W/ Pre-mill and Corner Rounding, 2016 Omal HBD 1300OF CNC Bore and Dowel Machinę, 2016 CPC Case Clamp, Biesse Rover A 3.40FT CNC Router, Plus Much More! Open house on April 12, 2022 (9 AM - 3 PM) with machinery still in operation.
-
Item Location
15220 Texaco Ave., Paramount, CA 9023
-
Make
SCMI
-
Model
"Olimpic S1000-T-ERL"
-
Serial Number
AH/118183
-
Year
2014
-
Phase
3 PHASE
-
Voltage
230 VOLT
-
Inspection Date
Please see Home Page for Open House date(s) or Private Inspetions
-
Final Removal Date
-
Estimated Dimensions
48" x 252" x 64"
-
Estimated Weight
6,500 Lbs
-
Seller Comment
Aaron @ All-Ways Trucking @ 541-608-6532 or John @ NCL Trucking @ 615-452-7651
-
Load Fee
A rigger is required for this lot. Please Contact: Marco Salinas @ West Coast Movers, 323-588-3533 or [email protected]
-
page views
3694
Edge Capacity, 0.4 to 15 mm (0.016 to 5/8") for strip feeding.
Panel Capacity, min. width 50 mm and 140 mm min. length, (2.0" and 5-1/2"). Panel thickness min./max. 8 - 60 mm (3/8" - 2-3/8").
Adjustable In-feed Fence: Manually pre-set with digital indicator and pneumatic panel spacing device.
Pre-Milling Station, RT-E: Spindles 2 x 5.25 HP, 12,000 RPM, (1) with PLC controlled jump action and manual digital indicators positioning and Diamond Cutter-heads.
Automatic Strip & Coil Feed Magazine: For straight edges and 3 mm guillotine for coils.
Gluing Station, Vc/1000: For EVA (Hot Melt) with Teflon coated glue tank and quick disconnect to change glue tanks fast if needed. Heat-up time approx. 10 Minutes
Pressure Section: Servo motor positioning, (4) pressure rollers, first larger, Teflon coated and powered.
End Trimming Station K-SEL: Front & rear 2 x 0.5 HP, 12,000 RPM motors mounted on THK guides, swivels 0° - 15°, rapid set up between straight and angled cutting with the automatic swivel cylinder.
Flush Trimming Unit, Rsp: Top/Bottom, 2 x 1.5 HP, 12,000 RPM with 2 pre-set pneumatic positions, flush and overhang, remote pneumatic in/out positioning.
Bevel/Radius Trimming Unit, Ri/S: Programmable, servo motor positioning, 2 x 1.0 HP - 12.000 RPM motors for change-over on the fly.
Corner Rounding / Trimming Unit, Round-K: For additional top & bottom trimming of linear an/or vertical leading & trailing corner when edgebanding all (4) sides, 2 x 0.8 HP - 12,000 RPM motor. Comes with (2) pre-set pneumatic positions to allow to go from thick to thin pvc automatically.
Profile Scraping Unit "RAS/1000": Top/Bottom with (2) indexed manual pre-sets. Large dia. copy wheels for max. accuracy and pneumatic in/out positioning.
Glue Scraping Unit, "Rca/2c": Top/bottom flat glue scraper with pneumatic positioning through controller and air-blow off nozzle to keep the knifes clean.
Buffing Unit "SPN": Top/bottom, oscillating 2 x 0.25 HP - 3,000 RPM motors, tilting up to 12°.
Hot Air Unit: Single blower with adjustable heat range and directional heat shield for top/bottom coverage. Restores color luster on thick pvc edging materials that my be lost during the edge scraping process.
See pictures for hours. Actual hours will increase as machine is still in service.
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
For machinery rigging or moving, please contact Marco Salinas @ West Coast Machinery Movers, 323-588-3533 or [email protected]
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa, MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.
Sales Tax: All purchases from this auction will be subject to 10.25% California /Paramount Sales Tax unless the purchaser is exempt.
Sales Tax Exemption: All buyers claiming exemption from sales tax will need to provide MachineryMax INC with a properly filled out and executed Sales Tax exemption certificate prior to buyers removal of purchased items.