GW Mfg. - Panel Division Closure - Poughkeepsie, NY (Closed #31500456)
GW Mfg. closes its panel division. Featured assets include: Complete Kuper veneer cell, Heesemann MFA6 Wide Belt Sander, Wintersteiger Thin Kerf Resaw, Routech 5 Axis CNC Router, Dodds CNC Dovetail Machine, plus much more!Terms & Conditions
Value Added Service Information
Hemsaw "H130HM" Metal Cutting Horizontal Bandsaw
GW Manufacturing - Poughkeepsie, NY
Dual Column, Metal-Cutting Production Band Saw
Capacity: 20" W x 20" H
Blade: 1.5" x 19'0" x .050"
Motor: 10 HP
Hydraulics: 2 HP
Swing-Away Control Console
The Control Console is located on the front of the saw, in a swing-away console, for operator convenience.
24" Solid Discharge Table
A standard solid discharge table provides easier handling after the cut. The table is 24" in length and is fully coolant panned.
Full Stroking Main Vise
A Full-Stroking Main Vise clamps material at the turn of a switch and holds the material in place to ensure accurate cuts. The clamping pressure is easily adjusted to clamp various materials.
Carbide Blade Guides & Lead In/Lead Out Roller Guides
A blade guide system is composed of side and back blade guides which are flat carbide inserts. In addition to precision-ground flat carbides, roller guides are used to reduce vibration when cutting hard materials.
Built-In Flood Coolant System
The saw has a totally built-in coolant system with sealed coolant pump with coolant that is dispensed through the guides on each sides of the cut.
Adjustable Feed Rate & Cut Pressure
The saw arm Feed Rate can be adjusted from zero to 3 inches per second. Cutting pressure can be adjusted for effective metal removal rates.
A shaft-driven Blade Brush is standard for positive removal of metal chips that lodge in the blade gullets. This system ensures a cleaner blade, more accurate cuts and prolonged blade life.
Push button Blade Speed
Blade speed can be adjusted with an infinitely variable speed drive from the console with push button controls. The blade speed is shown on the console with LED Readout.
Powered Guide Arm
The Powered Moveable Guide Arm provides optimum blade support as material size changes. It quickly adjusts the guides that hold the blade securely, providing straighter cuts and longer blade life.
Powered Blade Tension
The Powered Blade Tensioner maintains proper blade tension at all times during the cut, compensating for blade stretch. Changing blades on the saw is done in minutes with the use of the Powered Blade Tensioner.
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
- Sold Winning Bid: $1,000.00 USD
- 1 Bid(s) View Bid History
- High Bidder: A****d
- Located Poughkeepsie, NY
- MAKE Hemsaw
- MODEL "H130HM"
- SERIAL NUMBER 480395
- PHASE 3 PHASE
- VOLTAGE 230/460
- ESTIMATED DIMENSIONS 120" x 84" x 60"
- ESTIMATED WEIGHT 2,500 Lbs
- Value Added Service Info Aaron @ All-Ways Trucking @ 541-608-6532 or John @ NCL Trucking @ 615-452-7651
- Load FEE $195- non-negotionable loading fee has been established. This includes loading onto a flat bed trailer. Requests for additional labor will be extra.
- Lot # 018
- System ID # 31594244
- End Date
- Start Date
- 538 Page Views
|CONTACT ALWAYS TRUCKING 541-608-6532||$0.00 USD|
|LOADING FEE||$195.00 USD|