× Bidding has ended on this item.

GW Mfg. - Panel Division Closure - Poughkeepsie, NY (Closed #31500456)

GW Mfg. closes its panel division. Featured assets include: Complete Kuper veneer cell, Heesemann MFA6 Wide Belt Sander, Wintersteiger Thin Kerf Resaw, Routech 5 Axis CNC Router, Dodds CNC Dovetail Machine, plus much more!

Terms & Conditions
Value Added Service Information
This Auction Uses Proxy Bidding.
Ended

Ayen "SKB 50-2" Construction Borer

GW Manufacturing - Poughkeepsie, NY

  Lot # 007
Listing Image
2022-02-01 10:25:00 PT 2022-02-01 10:25:00 PT America/Denver Ayen "SKB 50-2" Construction Borer AYEN SKB-50 ... 32 MM Boring Machine for Construction and Line-Drilling operations. 25-Spindles total with (1) 180 swivel drill head, (25) spindles, drills vertically from top horizontally from rear, drills at any angle between 0 - 90 with a positive stop at 45. 25-Spindle swivel head assembly converts in under (1) minute from construction to line boring by flipping the 25-spindle drill-head 180 and re-positioning the universal fence system. . 3 HP - 3,450 RPM gear box motor, 39 panel width cap. with a 30-1/4 drilling width. Rear work-piece support roller for step through construction drilling. Pneumatically controlled rear stop-fence. (2) special flip stops for construction drilling set-up, (2) standard flip stops and (2) index pin stops for line drilling set-up. (4) Pneumatic quick-set hold-down clamps, fence setting gauge, foot pedal control for drilling cycle start, operations manual, miscellaneous used drill bits. The information provided in this lot was gathered from literature, internet physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify. Unknown
Description

AYEN SKB-50 ... 32 MM Boring Machine for Construction and Line-Drilling operations.

25-Spindles total with (1) 180 ° swivel drill head, (25) spindles, drills vertically from top & horizontally from rear, drills at any angle between 0° - 90° with a positive stop at 45°.

25-Spindle swivel head assembly converts in under (1) minute from construction to line boring by flipping the 25-spindle drill-head 180° and re-positioning the universal fence system. .

3 HP - 3,450 RPM gear box motor, 39" panel width cap. with a 30-1/4" drilling width.

Rear work-piece support roller for step through construction drilling. Pneumatically controlled rear stop-fence.

(2) special flip stops for construction drilling set-up, (2) standard flip stops and (2) index pin stops for line drilling set-up.

(4) Pneumatic quick-set hold-down clamps, fence setting gauge, foot pedal control for drilling cycle start, operations manual, miscellaneous used drill bits.

The information provided in this lot was gathered from literature, internet & physical inspection.  It is thought to be accurate; but not guaranteed.  Bidders are urged to use the open house or private inspection periods to inspect and verify.

Additional Information
  • Located Poughkeepsie, NY
  • MAKE Ayen
  • MODEL "SKB 50-2"
  • SERIAL NUMBER 9022954
  • PHASE 3 PHASE
  • VOLTAGE 230 VOLT
  • ESTIMATED DIMENSIONS 60" x 55" x 72"
  • ESTIMATED WEIGHT 1,300 Lbs
  • Value Added Service Info Aaron @ All-Ways Trucking @ 541-608-6532 or John @ NCL Trucking @ 615-452-7651
  • Load FEE $150 - non-negotionable loading fee has been established. This includes loading onto a flat bed trailer. Requests for additional labor, crating or pallatization will be extra.
  • Lot # 007
  • System ID # 31577384
  • End Date
  • Start Date
  • 630 Page Views
Value Added Service Options
CONTACT ALWAYS TRUCKING 541-608-6532 $0.00 USD
LOADING FEE $150.00 USD