GW Mfg. - Panel Division Closure - Poughkeepsie, NY (Closed #31500456)

(25) Spindles (12-right & 13-left), 24" max. material width.

7.5 HP - 1,800 RPM motor, 10,500 RPM spindle speed,

X- & Y-Axis Servo controlled, precision movement of spindle unit with adjustable carriage stroke feed (10 - 25) movements/Min.

Foot pedal control to engage cutting cycle in manual mode.

Dust collector & noise abatement guards.

Automatic "oil mist" lubrication, adjustable chip breakers for clean out tenons.

Digital indicator screw type adjustment for end stops.

Capable of dovetailing a wide range of drawer material, including solid and laminated woods; lipped drawer front & back simultaneously dovetailed, produces up to (100) drawers/hour.

ALLEN-BRADLEY "PanelView Plus 700", pivoting color touch-screen featuring mode of operation (mortise or tenon), feed rate, calculating position of side stops based on part parameters entered, zero-fixture changeover.

Capable of running (2) drawer fronts at one time, single or continuous machine cycle.

Heavy Duty Chipbreaker with insert, precision dial adjustment and clamp pressure booster; bar code option (first 10 programs not password protected with remainder password protected); compact flash card programmable off-line with (250) programs.

The information provided in this lot was gathered from literature, internet & physical inspection.  It is thought to be accurate; but not guaranteed.  Bidders are urged to use the open house or private inspection periods to inspect and verify.