× Bidding has ended on this item.

GW Mfg. - Panel Division Closure - Poughkeepsie, NY (Closed #31500456)

GW Mfg. closes its panel division. Featured assets include: Complete Kuper veneer cell, Heesemann MFA6 Wide Belt Sander, Wintersteiger Thin Kerf Resaw, Routech 5 Axis CNC Router, Dodds CNC Dovetail Machine, plus much more!

Terms & Conditions
Value Added Service Information
This Auction Uses Proxy Bidding.
Ended

Heesemann "MFA-6" 3-Head Wide Belt Finish/Veneer Sander - 53"

GW Manufacturing - Poughkeepsie, NY

  Lot # 001
Listing Image
2022-02-01 10:17:24 PT 2022-02-01 10:17:24 PT America/Denver Heesemann "MFA-6" 3-Head Wide Belt Finish/Veneer Sander - 53" 1,350 mm (53) max. working width. Head configuration:(1) Steel 10 Contact Roller, (1) Segmented Cross bel1 (1) Longitudinal Segmented Platen heads and(1)Brush Roller. Heads are equipped with HEESEMANNs patented CSD selective pressure adjustment system, sensors placed every 5/8 (16 mm) sense part configuration; pressure for each segment can be pre-programmed to provide less pressure on the outer edges or more in the center if desired. The CSD computer control will hold a maximum of (20) programs. Constant pass-line height of 880 mm (31.5), vacuum bed assembly to ensure flatness of parts and feeding of small parts 6.6 kW (8.8 HP), variable feed speed5 - 15 m/Min (16 -50 FPM),4 kW (5.3 HP) feed motor, motorized thickness opening 3 to 150 mm (1/8 - 6) with LED readout and motor load meters. WINDOWS operating systemstorage for multiple sanding programs with 100 memory addresses for: CSD sanding pressure, sanding start and stop, sanding belt speeds, grit sequence indication, sanding belt selection ON/OFF multi track feeding. RS-232 serial port / RJ-45 LAN port. . TFT color touch screen with 3.5 floppy for program backup. -Right hand side located. Electronic abrasive belt tracking, intermittent air blast cleaners for sanding belts, conveyor belt and workpiece.Sanding belt access Left hand side, CE Compliant. Total power installed 63 kW. Space requirements L x W x H: 2,965 x 2,300 x 2,050 mm (117 x 91 x 81).Weight approx. 5,500 kG (12,125 Lbs). The information provided in this lot was gathered from literature, internet physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify. Unknown
Description

1,350 mm (53") max. working width.

Head configuration: (1) Steel 10" Contact Roller, (1) Segmented Cross bel1 (1) Longitudinal Segmented Platen heads and (1) Brush Roller.

Heads are equipped with HEESEMANN's patented "CSD" selective pressure adjustment system, sensors placed every 5/8" (16 mm) sense part configuration; pressure for each segment can be pre-programmed to provide less pressure on the outer edges or more in the center if desired. The "CSD" computer control will hold a maximum of (20) programs.

Constant pass-line height of 880 mm (31.5"), vacuum bed assembly to ensure flatness of parts and feeding of small parts 6.6 kW (8.8 HP), variable feed speed 5 - 15 m/Min (16 - 50 FPM), 4 kW (5.3 HP) feed motor, motorized thickness opening 3 to 150 mm (1/8 - 6") with LED readout and motor load meters.

WINDOWS operating system storage for multiple sanding programs with 100 memory addresses for:  CSD sanding pressure, sanding start and stop, sanding belt speeds, grit sequence indication, sanding belt selection "ON/OFF" & multi track feeding.

RS-232 serial port / RJ-45 LAN port. . TFT color touch screen with 3.5 floppy for program backup. - Right hand side located.

Electronic abrasive belt tracking, intermittent air blast cleaners for sanding belts, conveyor belt and workpiece. Sanding belt access Left hand side, CE Compliant.

Total power installed 63 kW. Space requirements L x W x H: 2,965 x 2,300 x 2,050 mm (117" x  91" x 81"). Weight approx. 5,500 kG (12,125 Lbs).

The information provided in this lot was gathered from literature, internet & physical inspection.  It is thought to be accurate; but not guaranteed.  Bidders are urged to use the open house or private inspection periods to inspect and verify.

Additional Information
  • Located Poughkeepsie, NY
  • MAKE Heesemann
  • MODEL "MFA-6"
  • SERIAL NUMBER 200302251
  • YEAR 2003
  • PHASE 3 PHASE
  • VOLTAGE 480 VOLT
  • ESTIMATED DIMENSIONS 108" x 90" x 96"
  • ESTIMATED WEIGHT 10,000 Lbs
  • Value Added Service Info Aaron @ All-Ways Trucking @ 541-608-6532 or John @ NCL Trucking @ 615-452-7651
  • Load FEE Rigger: Preston Machinery, Tom Preston, 269-685-7591, [email protected]
  • Lot # 001
  • System ID # 31556706
  • End Date
  • Start Date
  • 1264 Page Views
Value Added Service Options
CONTACT ALWAYS TRUCKING 541-608-6532 $0.00 USD
CONTACT LOCAL RIGGER $0.00 USD