× Bidding has ended on this item.

Woodworking Warehouse Machinery Auction 121 - Tracy CA (Closed #31514281)

All assets moved to Tracy California warehouse for the convenience of buyers. Includes 2015 SCM Group K560ERT Automatic Edgebander with Pre-Mill and Corner rounding, Striebig Vertical Panel Saw, SCM T110 Shaper, and more. For additional questions or to view machines prior to auction close, please contact Kirk at 925-250-8248 or via email at [email protected]

Terms & Conditions
Value Added Service Information
This Auction Uses Proxy Bidding.
Ended

SCM GROUP "K560 ERT" Automatic Edgebander, Premill/Cornerrounding, Year 2015

Woodworking Machine Warehouse Auction - Tracy CA

  Lot # T121-5PM
Listing Image
2022-01-25 10:42:59 PT 2022-01-25 10:42:59 PT America/Denver SCM GROUP "K560 ERT" Automatic Edgebander, Premill/Cornerrounding, Year 2015 **Specification as per manufacturer website. Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8mm. Machine Base The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy. Electronic Positioning of the Top Pressure Beam The height of the pressure beam is electronically positioned through the controller per the program. All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings. Capacities and Speed Edgebanding thickness: .4mm - 6mm (.016-1/4) Guillotine capacity: 3mm Feed speed: 40/60 ft/min. Panel height: 3/8 min 2 1/8 max Minimum panel length: 5 1/2 Minimum panel width: 2 3/8 Minimum distance between panels: 20 Glue Station Warm up time is approximately eight to ten minutes. The unit is also equipped with a quick disconnect plug for changing from one pot to another. Pneumatic Pressure Section There are a total of three pressure rollers for pressing the banding to the workpiece edge. The first roller is powered, and it is also Teflon coated to prevent the banding material from slipping. The two idle rollers have opposing one-degree tilt to provide extra pressure along the top and bottom edge. The machine comes standard with an automatic strip magazine. Comes standard with a mechanical digital readout for the positioning of the pressure section. The glue pot is Teflon coated and has a 3.3lb. capacity. Comes equipped with a quick change feature that allows the operator to remove the glue pot in less than two minutes. Startouch Controller The K 560 comes equipped with the Startouch controller. This controller features a touch screen display. Capable of storing 100 programs. Color graphic display of all the working units. Tracks production information, diagnostic information and monitors maintenance schedules. Choose mms or inches, as well as 5 different languages. Swivels 270 degrees and tilts for easy access. Anti-Adhesive The machine comes equipped with an anti-adhesive unit positioned prior to the pre milling unit. It prevents the buildup of glue on the top and bottom of the panel. The unit comes with two independent nozzles and a tank of anti-adhesive liquid. Adjustable Infeed Fence The infeed fence is manually adjustable with a mechanical digital readout for determining stock removal. RT-V Pre-Milling Station: To rectify/clean panels already sized and squared before the edge is applied. The unit is composed of two high frequency motors (2.0hp) with jumping action controlled through the PLC. The cutting heads are adjustable vertically. Diamond cutters are standard with 49mm height. K-SEL 2 End Trimming Station This unit is composed of two independent .50 hp motors mounted on THK guides. End trim utilizes a draw cut system for reduced blade projection on thick panels. The unit comes standard with automatic tilting of the unit from the control panel with two preset positions. R/K Edge Trimming Station This unit is composed of two independent .7 hp motors operating at 12,000 rpm. It comes standard with THREE position pneumatics, this allows the operator to go from thin tape, to 3mm pvc, to solid wood, through the control panel. All adjustments are carried out with mechanical digital readouts. The unit has top and bottom copy wheels and side copy shoes. The motors have quick release plugs to facilitate tooling changes. The top trim unit is equipped with a three roller nesting kit as standard, beneficial when running panels with grooves and/or 35mm hinge holes. ROUND-X Corner Rounding Unit: Two independent .50hp motors that slide on THK guides ensuring the highest quality finish. Unit is designed to work as an additional set of trimmers for rounding the top/bottom as well as the front/rear corners of work piece with 3mm PVC edges. The unit is equipped with front and lateral copying devices and pneumatic blowers to clean the panel. Dust shrouds surround the cutter and travel with the unit as it trims. The unit can go from thin tape to 3mm PVC, through the controller, with no manual adjustments by the operator. RAS / K Profile Scraping Station The profile scraping station designed to remove knife marks from thick PVC. The unit is equipped with pneumatic in/out positioning through the controller. It has a large diameter horizontal copy wheel and side copy wheel device with digital indicators. It features a quick knife replacement system and comes with 3mm knives. The top profile scrape unit is equipped with a three roller nesting kit as standard, beneficial when running panels with grooves and/or 35mm hinge holes. RC-V Glue Scraping Unit The unit eliminates any excess glue to help improve the quality of the glue joint. It comes standard with double copy wheels on the top and bottom of the panel, air blowers are standard to help keep the knives clean, the off fall is collected in the collection bin and it is pneumatically positioned through the controller. SP-V Buffing Unit The buffing unit has two .25 hp motors. It can also be tilted up to 12 degrees to provide a softer, more refined edge finish. Acoustical Safety Enclosure All working units are enclosed under an acoustical safety hood to reduce noise and prevent accidents. The hood has a safety microswitch which prevents the machine from operating when the hood is open. Centralized Dust Extraction Machine comes with two 3 ports for the premilling station, two 2 ports for the top and bottom trim station and one 3 port for the 3mm collection bin for extraction. Technical Specifications Glue Pot Unit: Heating Time Approx. 8-10 min. Glue Capacity 3.3 lb Pre-Milling Unit: Horsepower 2.0 HP (2) RPM 19,000 RPM Height 64mm Max. Stock Removal Adjustable End Cutting Trimming Station: Horsepower .25 HP (2) RPM 12,000 RPM Tilting 2 preset positions Edge Trimming Unit: Horsepower .70 HP (2) RPM 12,000 RPM Cutting Tools Combination Cutters Corner Rounding Unit: Horsepower .50 HP (2) RPM 12,000 RPM Cutting Tools 3mm Radius Scraping Unit: Knife Radius 3mm Buffing Unit: Horsepower .25 HP (2) RPM 2,800 RPM Diameter/Bore 152mm/17mm Feed Motor Horsepower 2 HP Feed Speed 40/60 FPM Frequency Converter 200 Hz Dust Hood Diameter Per Drawing Pneumatic Operating Pressure 90 PSI Machine Weight: 4,008lbs. Electrical: 57 amps @ 230v three phase Dust: 3,250 cfm Dimensions(LxWxH): 182 x 67 x 59 Unknown
Description

**Specification as per manufacturer website.

Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8mm.

Machine Base

The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.

Electronic Positioning of the Top Pressure Beam

The height of the pressure beam is electronically positioned through the controller per the program. All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings. 

Capacities and Speed

  • Edgebanding thickness: .4mm - 6mm (.016-1/4”)

  • Guillotine capacity: 3mm

  • Feed speed: 40/60 ft/min.

  • Panel height: 3/8” min – 2 1/8” max

  • Minimum panel length: 5 1/2”

  • Minimum panel width: 2 3/8”

  • Minimum distance between panels: 20” 

Glue Station

 Warm up time is approximately eight to ten minutes. The unit is also equipped with a quick disconnect plug for changing from one pot to another.

Pneumatic Pressure Section

There are a total of three pressure rollers for pressing the banding to the workpiece edge. The first roller is powered, and it is also Teflon coated to prevent the banding material from slipping. The two idle rollers have opposing one-degree tilt to provide extra pressure along the top and bottom edge. The machine comes standard with an automatic strip magazine. Comes standard with a mechanical digital readout for the positioning of the pressure section. The glue pot is Teflon coated and has a 3.3lb. capacity. Comes equipped with a quick change feature that allows the operator to remove the glue pot in less than two minutes.

Startouch Controller

The K 560 comes equipped with the “Startouch” controller.  This controller features a touch screen display. Capable of storing 100 programs. Color graphic display of all the working units. Tracks production information, diagnostic information and monitors maintenance schedules. Choose mm's or inches, as well as 5 different languages. Swivels 270 degrees and tilts for easy access.

Anti-Adhesive

The machine comes equipped with an anti-adhesive unit positioned prior to the pre milling unit. It prevents the buildup of glue on the top and bottom of the panel. The unit comes with two independent nozzles and a tank of anti-adhesive liquid.

Adjustable Infeed Fence

The infeed fence is manually adjustable with a mechanical digital readout for determining stock removal.

RT-V Pre-Milling Station:

To rectify/clean panels already sized and squared before the edge is applied. The unit is composed of two high frequency motors (2.0hp) with jumping action controlled through the PLC.  The cutting heads are adjustable vertically. Diamond cutters are standard with 49mm height. 

K-SEL 2” End Trimming Station

This unit is composed of two independent .50 hp motors mounted on THK guides. End trim utilizes a draw cut system for reduced blade projection on thick panels. The unit comes standard with automatic tilting of the unit from the control panel with two preset positions. 

R/K Edge Trimming Station  

This unit is composed of two independent .7 hp motors operating at 12,000 rpm. It comes standard with THREE position pneumatics, this allows the operator to go from thin tape, to 3mm pvc, to solid wood, through the control panel. All adjustments are carried out with mechanical digital readouts. The unit has top and bottom copy wheels and side copy shoes. The motors have quick release plugs to facilitate tooling changes. The top trim unit is equipped with a three roller nesting kit as standard, beneficial when running panels with grooves and/or 35mm hinge holes.

“ROUND-X” Corner Rounding Unit: 

Two independent .50hp motors that slide on THK guides ensuring the highest quality finish. Unit is designed to work as an additional set of trimmers for rounding the top/bottom as well as the front/rear corners of work piece with 3mm PVC edges. The unit is equipped with front and lateral copying devices and pneumatic blowers to clean the panel. Dust shrouds surround the cutter and travel with the unit as it trims. The unit can go from thin tape to 3mm PVC, through the controller, with no manual adjustments by the operator.  

RAS / K Profile Scraping Station

The profile scraping station designed to remove knife marks from thick PVC. The unit is equipped with pneumatic in/out positioning through the controller. It has a large diameter horizontal copy wheel and side copy wheel device with digital indicators. It features a quick knife replacement system and comes with 3mm knives. The top profile scrape unit is equipped with a three roller nesting kit as standard, beneficial when running panels with grooves and/or 35mm hinge holes.

RC-V Glue Scraping Unit

The unit eliminates any excess glue to help improve the quality of the glue joint. It comes standard with double copy wheels on the top and bottom of the panel, air blowers are standard to help keep the knives clean, the off fall is collected in the collection bin and it is pneumatically positioned through the controller.

SP-V Buffing Unit

The buffing unit has two .25 hp motors. It can also be tilted up to 12 degrees to provide a softer, more refined edge finish.

Acoustical Safety Enclosure

All working units are enclosed under an acoustical safety hood to reduce noise and prevent accidents. The hood has a safety microswitch which prevents the machine from operating when the hood is open. 

Centralized Dust Extraction

Machine comes with two 3” ports for the premilling station, two 2” ports for the top and bottom trim station and one 3” port for the 3mm collection bin for extraction.

 

Technical Specifications

Glue Pot Unit:

 

  Heating Time

Approx. 8-10 min.

  Glue Capacity

3.3 lb

Pre-Milling Unit:

 

  Horsepower

2.0 HP (2)

  RPM

19,000 RPM

  Height

64mm

  Max. Stock Removal

Adjustable

End Cutting Trimming Station:

 

  Horsepower

.25 HP (2)

  RPM

12,000 RPM

  Tilting

2 preset positions

Edge Trimming Unit:

 

  Horsepower

.70 HP (2)

  RPM

12,000 RPM

  Cutting Tools

Combination Cutters

Corner Rounding Unit:

 

  Horsepower

.50 HP (2)

  RPM

12,000 RPM

  Cutting Tools

3mm Radius

Scraping Unit:

 

  Knife Radius

3mm

Buffing Unit:

 

  Horsepower

.25 HP (2)

  RPM

2,800 RPM

  Diameter/Bore

152mm/17mm

Feed Motor Horsepower

2 HP

Feed Speed

40/60 FPM

Frequency Converter

200 Hz

Dust Hood Diameter

Per Drawing

Pneumatic Operating Pressure

90 PSI

Machine Weight:

4,008lbs.

Electrical:

57 amps @ 230v three phase

Dust:

3,250 cfm

Dimensions(LxWxH):

182” x 67” x 59”

Additional Information
  • Located 1905 N. MACARTHUR DRIVE, SUITE #110, TRACY CALIFORNIA 95376
  • MAKE SCM Group
  • MODEL K560 ERT
  • SERIAL NUMBER AH/118880
  • YEAR 2015
  • PHASE 3 PHASE
  • VOLTAGE 230 VOLT
  • INSPECTION DATE BY Appointment only, contact Kirk Gass 925-250-8248
  • FINAL REMOVAL DATE February 4th, 2022
  • ESTIMATED DIMENSIONS 14' x 47" x 68"
  • ESTIMATED WEIGHT APPROXIMATELY 4000 lbs.
  • Lot # T121-5PM
  • System ID # 31532216
  • End Date
  • Start Date
  • 667 Page Views
Value Added Service Options
CONTACT ALWAYS TRUCKING 541-608-6532 $0.00 USD
LOADING FEE $200.00 USD