× Bidding has ended on this item.

Shaw Almex "TF2-4-8" Thermoforming Vacuum Press (2005) - Monroe, NC (Closed #31299266)

Terms & Conditions
Value Added Service Information
This Auction Uses Proxy Bidding.
Ended

Shaw Almex "TF2-4-8" Thermoforming Vacuum Press (2005)

Monroe, NC

  Lot # 001
Listing Image
2022-01-11 10:09:28 PT 2022-01-11 10:09:28 PT America/Denver Shaw Almex "TF2-4-8" Thermoforming Vacuum Press (2005) 48 X 96 Thermo-forming Laminating Press, with vacuum membrane-less operation designed for 57 wide vinyl products; works without hydraulics or pneumatic cylinders. The unit uses a 3 HP BUSCH vacuum pump and 350 Watt bulb heaters during the cycle. Loading trays dim. are 52 x 100 ID x 1.75 deep tray system with magnetic pin system for loading and unloading; Individually heated and thermostatically controlled bulb heaters offer operating temperatures up to 300 F (approx). Loading/unloading table at the in-feed, this is for the loading unloading of the press cycle. Control cabinet with ALLEN BRADLEY PLC with Panel View 550 Touchscreen programmable controller for laminating cycle, cycle and heat controls with (4) digital timers; thermostat timers to handle different pressing conditions. Operating pressure 75 PSI, max. operating temperature 300 (most foils work at 150 - 180 F range). - Stores and recalls recipes (individual programs) for specific materials and applications. Press dimensions; 120L x 73 H x 73 W. The information provided in this lot was gathered from literature, internet physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify. Unknown
Description

48" X 96" Thermo-forming Laminating Press, with vacuum membrane-less operation designed for 57" wide vinyl products; works without hydraulics or pneumatic cylinders.

The unit uses a 3 HP BUSCH vacuum pump and 350 Watt bulb heaters during the cycle.

Loading trays dim. are 52" x 100" ID x 1.75" deep tray system with magnetic pin system for loading and unloading; Individually heated and thermostatically controlled bulb heaters offer operating temperatures up to 300° F (approx).

Loading/unloading table at the in-feed, this is for the loading & unloading of the press cycle.

Control cabinet with ALLEN BRADLEY PLC with "Panel View 550" Touchscreen programmable controller for laminating cycle, cycle and heat controls with (4) digital timers; thermostat & timers to handle different pressing conditions.

Operating pressure 75 PSI, max. operating temperature 300° (most foils work at 150° - 180° F range). - Stores and recalls "recipes" (individual programs) for specific materials and applications.

Press dimensions; 120"L x 73" H x 73" W.

The information provided in this lot was gathered from literature, internet & physical inspection.  It is thought to be accurate; but not guaranteed.  Bidders are urged to use the open house or private inspection periods to inspect and verify.

Additional Information
  • Located 411 E. Windsor Street, Monroe, NC
  • MAKE Shaw Almex
  • MODEL "TF2-4-8"
  • SERIAL NUMBER 2005-12-42IND
  • YEAR 2005
  • PHASE 3 PHASE
  • VOLTAGE 230 VOLT
  • INSPECTION DATE By Appointment only - Please e-mail requests to: [email protected]
  • FINAL REMOVAL DATE January 12-21, 2022 (by appointment)
  • ESTIMATED DIMENSIONS 120"L x 73" H x 73" W.
  • ESTIMATED WEIGHT 3,500 Lbs
  • Value Added Service Info NCL Trucking, John, 615-452-7651 or Aaron at All-Ways Trucking at 541-608-6532.
  • Load FEE $195 - non-negotionable loading fee has been established. This includes loading onto a flat bed trailer. Requests for additional labor will be extra.
  • Lot # 001
  • System ID # 31300066
  • End Date
  • Start Date
  • 1528 Page Views
Value Added Service Options
CONTACT ALWAYS TRUCKING 541-608-6532 $0.00 USD
LOADING FEE $195.00 USD