Ask Seller
Shaw Almex "TL-6-4-9" Thermoforming Membrane Press 
Ended
Late Model Machinery - Eatonton, GA
- Winning Bid : $9,100.00 USD Sold
- 13 Bid(s)
- High Bidder: L****4
Cabinet Concepts - Assets No Longer Required - Eatonton, GA ( Closed #30645375 )
Rigging Quotes: Gorham Industrial - Windsor, SC - James Gorham - 803-617-8434 - [email protected]
-
Item Location
Eatonton, GA
-
Make
Shaw Almex
-
Model
"TL-6-4-9"
-
Serial Number
A101-169
-
Year
-
Phase
3 PHASE
-
Voltage
460 VOLT
-
Inspection Date
By Appointment only - Please e-mail requests to: [email protected]
-
Final Removal Date
-
Estimated Dimensions
96" x 144" x 102" Mahine only size
-
Estimated Weight
-
Seller Comment
Aaron @ All-Ways Trucking @ 541-608-6532 or John @ NCL Trucking @ 615-452-7651
-
Load Fee
A rigger is required for this lot.
-
page views
1557
Thermo-Laminating Press, membrane or "membraneless" operation for vinyl, heat transfer foils & veneer products; by the flip of a switch at the control console it changes from membrane to membraneless pressing. It uses "high volume" air pressure and a powerful instant vacuum creating suction and pressure at the same time.
Works without hydraulic cylinders: A platen size rubber pressure air bag under the lower platen (bolster) inflates and can withstand pressure up to 200 PSI; by in- & deflating it opens-and-closes the Press; a 240-gal. air tank supports the in/out high volume air movement.
The vacuum that sucks down the overlay to the substrate is generated by a 5 HP vacuum pump and supported by 240-gal. vacuum tank for instant vacuum power.
Double shuttle tray system, each tray 46" x 100" x 1-1/4" deep, they shuttle in-and-out of press on track guided casters for loading-and-unloading.
54" x 108" Aluminum top platen with a standard 3 mm thick silicone membrane (currently not being used); a small vacuum is used to draw the membrane up against the upper heated platten.
46" x 100" Max. part size for full wrap, 2" max. part thickness and a 2-1/4" max. chamber height; 84 PSI max. laminating pressure.
Top platen & infeed lower tray (platen): Both with resistance silicone heater elements, 150° - 350° F max. temperature with infinite control, 21 kW heating elements in each platen.
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
Rigging Quote: Gorham Industrial - Windsor, SC - James Gorham - 803-617-8434 - [email protected]
Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.
Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa, MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.