Ask Seller
Holz-her "Sprint 1320" Edgebander -Servo Adjust & 3mm 
Ended
J-Kraft in Houston, TX
- Winning Bid : $12,000.00 USD Sold
- 54 Bid(s)
- High Bidder: n****e
J-Kraft in Houston, TX offering machinery being replaced with new machines. ( Closed #27697985 )
Weeke BHX 055 Vertical CNC machining center (2013), Holzma HPP 250/38/38 Beam Saw (2012), Brandt KDF 520 Edgebander (2007), (2) Uhling CAse Clamps, Larick Shape & Sand, Vorwood Shape & Sand, Holz-her 1320 Edgebander, JLT Clamp & more.
-
Item Location
Houston, TX
-
Make
Holz-her
-
Model
"Sprint 1320"
-
Serial Number
154/0-501
-
Year
-
Phase
3 PHASE
-
Voltage
230 VOLT
-
Inspection Date
By Appointment only - Please e-mail requests to: [email protected]
-
Final Removal Date
-
Estimated Dimensions
192" x 48" x 65"
-
Estimated Weight
3,500 Lbs.
-
Seller Comment
A non negotionable loading fee has been established - See below. This includes the rigging and loading onto a flat bed trailer. Requests for additional labor, crating or pallatization will be extra.
-
Load Fee
$250
-
page views
5560
0.3 - 15 mm Thickness edge banding capability (3 mm coil or 15 mm max. strip); 6 - 50 mm panel thickness, work piece width min. of 60 mm; work piece Length min. 180 mm.
Programmable Logic Control (PLC) for Edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing.
Programs can be easily created and recalled at will; screen with graphic interface makes programming easy, icon of each unit may be brought up on the screen to show the operator the status of the unit and the parameters which can be programmed.
"1913" Edgestrip Magazine; (1) Universal magazine for solid edges, strips, and coiled material.
"1906" Gluing Station - Cartridge System: Servo controlled pressure section with (1) large driven roller & (2) cantered idle rollers.
"1918" Front & rear end trim unit (0.35 kW - 9,000 RPM motor each), Uni-Point axis for no re-indexing when changing from flush to bevel end trim (0° - 10° bevel),"PCS" Pneumatic Changeover from flush to bevel from control panel.
"1823" Top & bottom flush trim unit (0.6 kW - 300 Cy HF motors 18,000 RPM Motor ea.), SIKO digital readouts.
"1824"Top & Bottom trim unit (0.6 kW - 18,000 RPM each motor).
"1829" Scraping unit.
"1833" 1-Motor Corner Rounding unit: For edges up to 3 mm edge thickness; incl.
"1964" Top edge scraping unit.
"1940" Top & bottom buffing station: Possible to adjust in any direction (vertical tilt is 0° - 5°, horizontal Swivel is 0° - 20°); 1,440 RPM wheel rotation.
Variable feed speed 8 / 18 m/min (26/59 FPM); microprocessor for line control & glue temperature, and 10 KVA frequency changer.
The information provided in this lot was gathered from literature, internet & physical inspection. It is thought to be accurate; but not guaranteed. Bidders are urged to use the open house or private inspection periods to inspect and verify.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
Rigger info - Able Machinery Movers, Houston, TX - 713-460-2253
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa, MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.