Ask Seller
BRANDT "OPTIMAT KDN 520" AUTOMATIC EDGEBANDER, YEAR 2007 
Ended
LOCAL TECHNICAL COLLEGE MACHINE AUCTION - TRACY CA
- Winning Bid : $8,300.00 USD Sold
- 31 Bid(s)
- High Bidder: b****s
BRANDT EDGEBANDER, KUPER VENEER MACHINE, AND DIEHL STRAIGHT LINE - TRACY CA ( Closed #26678604 )
ITEMS UP FOR AUCTION FOR LOCAL OAKLAND TECHNICAL COLLEGE. ALL ITEMS MOVED TO TRACY CALIFORNIA FOR THE CONVENIENCE OF BUYERS. ITEMS INCLUDE BRANDT EDGEBANDER, KUPER VENEER MACHINE AND DIEHL STRAIGHT LINE RIP SAW. IF YOU HAVE QUESTIONS OR WOULD LIKE TO VIEW MACHINES PRIOR TO AUCTION CLOSE, PLEASE CONTACT KIRK @ 925-250-8248 OR VIA EMAIL AT [email protected]
-
Item Location
1905 N. MACARTHUR DRIVE, SUITE #110, TRACY CALIFORNIA 95376
-
Make
BRANDT
-
Model
OPTIMAT KDN 520
-
Serial Number
0-261-02-2858
-
Year
2007
-
Phase
3 PHASE
-
Voltage
230 VOLT
-
Inspection Date
BY appointment only, contact Kirk Gass 925-250-8248
-
Final Removal Date
APRIL 9TH, 2021
-
Estimated Dimensions
14' X 51" X 71"
-
Estimated Weight
APPROXIMATELY 2400 LBS.
-
Seller Comment
-
Load Fee
-
page views
3976
BRANDT MODEL #OPTIMAT KDN 520 HEAVY DUTY AUTOMATIC EDGEBANDER
YEAR 2007
230 VOLT, 3-PHASE MACHINE
SERIAL #0-261-02-2858
Brandt "KDN-520" Edgebander
Edgeband thickness 0.4 - 8 mm (0.016" - .250") ( 5/16”)
Coil cutoff maximum 0.8 x 55 mm 3.0 x 30 mm (PVC)
Edgeband height 12 - 55 mm (1/2" – 2 3/16”")
Panel length min. 160 mm (6 3/8")
Panel width min. 65 mm (2 3/8")
Panel thickness - min. 8 mm (5/16") - max. 50 mm (2")
Feed speed 11 m/min (36 FPM)
Feed motor 2.2 kw (3 HP)
Automatic Magazine for Strip and Coil Feeding
Large coil table (800 mm diameter) with built-in rollers to allow for 3 mm PVC coils
Edge strip capacity from 0.4 mm to 8 mm (0.016” – 5/16”)
Reversible glue roller rotation
Glue roller section is also retractable from fence line
One large driven pressure roller with pneumatic pressure control
Two secondary rollers, all with controlled side pressure
Setting of pressure zone equipped with digital counter accurate to .1 mm (.004")
Strengthened pre-cutter for cutting thick PVC edges from the coil; maximum 3 x 30 mm
Standard Gluing System, heat-up time is twelve minutes, quick-change glue tank for easy maintenance and glue color change
Glue temperature indication of both pre-melter and glue roller via LED thermostat display visible to operator
Automatic temperature reduction if not run within 15 minutes. This feature lowers the temperature automatically to 150 degrees C
End trim unit - two motors .18 kw (1/4 HP), 12,000 RPM, straight cut max. 8 x 45 mm (5/16" x 1 3/4")
Fine trimming unit .27 kw (1/3 HP), tilting range 0 - 15 degrees, 12,000 RPM, horizontal and vertical tracing with lateral location indexing via digital “Quickset” system calibrating to .1 mm (.004”)
Top/bottom scraping unit, program controlled pneumatic indexing
Top/bottom Buffing Unit, 2800 RPM, inclinable vertically and horizontally
Electronic frequency inverter
Integrated Electronic Line Control System for Increased Reliability and Diagnostic Assistance
PLC for machine setup and feedback
Outboard roller support
Sound Cover, equipped with two independent openings, safety interlock system
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginLOADING FEES WILL BE ADDED TO EACH WINNING BIDDERS INVOICE. THIS IS FOR LOADING ONTO FLAT BED TRUCK OR TRAILER ONLY.
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa, MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.