Bidding has ended on this item.
#LOT012

(2016) CPC "Action TF" Feed Thru Case Clamp Ended

Windsor Fixtures -Complete Plant Closure -Day 1- Lawrenceville, Ga

  • Winning Bid : $62,150.00 USD Sold
  • 78 Bid(s)
  • High Bidder: S****c
Documents
No documents available
Bidding Info
This auction uses Proxy Bidding.
Bids placed within the final 5 minutes will extend the auction closing time by 5 minutes.
img

WINDSOR FIXTURES INC COMPLETE PLANT CLOSURE - LAWRENCEVILLE, GA - DAY 1 ( Closed #26329166 )

For Rigging/Loading please contact:

Gorham Industrial, LLC - James Gorham - 803-617-8434 - [email protected] - www.gorhamindustrial.com

Preston Machinery, LLC - Tom Preston - 269-685-7591 - [email protected] - www.prestonmachineryllc.com

For Shipping Quotes, please contact: NCL Trucking, John, 615-452-7651

  • Item Location

    755 Raco Dr, Lawrenceville, GA 30046

  • Make

    CPC

  • Model

    Action TF

  • Serial Number

    101.432

  • Year

    2016

  • Phase

    3 PHASE

  • Voltage

    230 VOLT

  • Inspection Date

    March 18 and March 19 8:00-5:00PM - Contact Eric Beach 704-608-9830

  • Final Removal Date

    April 9, 2020

  • Estimated Dimensions

    15'x5'x100"

  • Estimated Weight

    2,250 Kgs

  • Seller Comment

    CONTACT ALWAYS TRUCKING for shipping quote 541-608-6532

  • Load Fee

    A rigger is required for this lot. Gorham Industrial, LLC 803-617-8434 [email protected] or Preston Machinery, 269.685.7591, Tom Preston, [email protected]

  • page views

    5325

  • ELECTRIC CASE CLAMP capable of obtaining extremely strong operating pressures that guarantee closing of large boxes with up to 6 dowels and multiple partitions.  Dowel construction relies on a tight, compressive fit between the dowel and hole.  Utilization of the electric case clamp to guarantee complete and tight closing of the hole-dowel coupling is paramount in high speed, dowel box construction.  

  • ACTION TF 2500 is an electric clamp powered by BRUSHLESS MOTORS with reinforced thick steel framework protected by epoxy priming and polyurethane two-component paint; color RAL 7035.

  • Full TOP platen pressing for maximum pressing PSI

  • The conveying belt is made of polyester with a low friction coefficient PVC cover.

  • Rack and Pinon transmission at all 4 corners of the top platen and side pressor keep the top platen in parallel and the side pressor square and fast positioning.  Unlike pneumatic clamps with bladders, the CPC clamp maintains a perfect squaring of the box.

  • Sizes (height and length) of box are read in a “real time” system by electronic sensors. Therefore no manual setup is required, allowing large volume mass-production having a random sized order.

  • The vertical and horizontal pressure is adjustable according to the type of furniture to be assembled.

  • Furniture clamping time is adjustable with a display placed on the control board.

  • The standard machine is supplied with FRONT and REAR photo cell barriers. 

  • The machine is set to work left to right from the operator’s control side. 

  • Safety Fence in the front/rear entry of the clamp.

FEATURES & BENEFITS 

  • Feed Through Case Clamp with high productivity and low operating cost. 

  • Production capacity up to 600 cases per shift (45 second cycle). 

  • Possibility to sequence different furniture pieces without manual intervention 

  • Automatically adjust both height and length with photoelectric cells and encoders. 

  • Pressure supplied by infinitely adjustable BRUSHLESS electro-motors 

  • Possibility to adjust the pressing strength, both vertical and horizontal

  • Superior control and pressure compared to pneumatic pressure systems 

  • Very quiet operation with low energy consumption

  • Low maintenance required 

  • Color touch screen utilizes presets for different clamp pressures. 

TECHNICAL SPECIFICATIONS

- Electric control panel board

- Vertical pressure single plate

- N.6 horizontal pressure devices (n.3 left side, n.3 right side)

- Worktable height 600 mm  (24”) 

- Belt width is 800mm 

- Vertical and horizontal pressure 0-1300 Kg (2860 Pounds)

- Installed power, TWO Brushless motors, 2,4 KW each

- Weight 2250 Kgs

- Working sizes :

Maximum Opening: 

Width: 2500 mm

Height: 1300 mm

Depth: 850 mm

Minimum: 

Width: 250 mm

Height: 250 mm

Depth: 250 mm


Translation speed: 16 Mt./min.

  • Electronic "ARM" device to read automatically cabinet  dimensions.

  • Safety barrier photocell on both sides of the machine to allow

  • ACCESS to front and back of cabinet for stapling, hot melt, etc on both sides of the case.

  • AUTOMATIC positioning of middle side clamping beams by programming the position

  • Touch screen Panel with firmware software by CPC in order to program cycles, etc. depending on customer’s kind of production

TOUCHSCREEN PANEL 5,7” on control board

TOUCHSCREEN CONTROL PANEL with GRAPHIC INTERFACE

All cycle data is programmable:

  • Lateral pressure

  • Vertical pressure

  • Pressure sequence 

- Top to close

- Side to square

- Top/Side  to press

  • Height of the middle side clamping beams

Cycle is customized depending on the cabinet size under process.

Further applications: 

  • General diagnostic

  • Manual operations

INFEED BELT CONVEYOR  (BOX ASSEMBLY STATION)

Bent steel framework of thick steel protected by epoxy priming and polyurethane two-component paint colour RAL 7035.  Motorized infeed belt with automatic control for loading clamp.  Pre-alignment fence for box.

  • The conveying belt is made of polyester with a low friction coefficient PVC cover.

  • Infeed Sensor to turn belt on and off

  • Length of conveyor             3000 mm
  • Width of conveyor belt              830 mm

  • Working table height           600 mm + / - 30mm

EXIT BELT CONVEYOR  (CLAMP DISCHARGE CONVEYOR)

Bent steel framework of thick steel protected by epoxy priming and polyurethane two-component paint colour RAL 7035.  Motorized infeed belt with automatic control for loading clamp.  Pre-alignment fence for box.

  • The conveying belt is made of polyester with a low friction coefficient PVC cover.

  • Belt Speed 20 mtrs/min

  • Length of conveyor             3000 mm

  • Width of conveyor belt              830 mm

  • Working table height           600 mm + / - 30mm

INVERTERS ON THE INFEED, CLAMP AND OUTFEED CONVEYORS

  • Adjustable Belt Speed 6-20 mtrs/min

  • Useful when coupling clamp in Assembly line

21x120" Belt In/Out Conveyor

Above specs taken from literature, internet and inspection; and thought to be accurate.  As always please take advantage of the inspection period to verify.

Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.

Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.

Please log in to view the bid history

Pick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.

For Rigging/Loading please contact:

Gorham Industrial, LLC - James Gorham - 803-617-8434 - [email protected] - www.gorhamindustrial.com

Preston Machinery, LLC - Tom Preston - 269-685-7591 - [email protected] - www.prestonmachineryllc.com

For Shipping Quotes, please contact: NCL Trucking, John, 615-452-7651

CONTACT ALWAYS TRUCKING 541-608-6532
$0.00 USD
CONTACT LOCAL RIGGER
$0.00 USD

All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.