Bidding has ended on this item.
#LOT008

Casadei "Flexa 27" Edgebander - NEW Comp Code R011301 Ended

YEAR END INVENTORY CLEARANCE OF MOSTLY BRAND NEW IN BOX.

  • Winning Bid : $22,300.00 USD Sold
  • 127 Bid(s)
  • High Bidder: f****n
Documents
Bidding Info
This auction uses Proxy Bidding.
Bids placed within the final 5 minutes will extend the auction closing time by 5 minutes.
img

BRAND NEW CASADEI YEAR END INVENTORY CLEARANCE - DULUTH GA ( Closed #25252971 )

YEAR END INVENTORY CLEARANCE OF MOSTLY BRAND NEW IN BOX AND ORIGINAL FACTORY CRATING MACHINES. MACHINES ARE CASADEI/BUSELLATO MACHINE MANUFACTURED BY SCM GROUP SPA IN ITALY. THERE ARE 12 MACHINES UP FOR AUCTION AND ALL WILL INCLUDE A 6-MONTH PARTS WARRANTY ONLY. THE LIST INCLUDES BRAND NEW CASADEI FLEXA SERIES EDGEBANDERS, CASADEI SHAPERS (BOTH TILTING AND NON-TILTING), AND MUCH MORE. IF YOU HAVE QUESTIONS, PLEASE CONTACT KIRK @ 925-250-8248 OR VIA EMAIL @ [email protected]. YOU CAN ALSO CONTACT ERIC BEACH @ 704-608-9830 OR AT [email protected] AUCTION WILL CLOSE ON THURSDAY, DECEMBER 10TH, 2020 AND PICKUP OF MACHINES WILL BE BY APPOINTMENT ONLY.

  • Item Location

    2475 Staellite Blvd, Duluth, GA 30096

  • Make

    Casadei

  • Model

    Flexa 27

  • Serial Number

    AB00009952

  • Year

    2019

  • Phase

    3 PHASE

  • Voltage

    230 VOLT

  • Inspection Date

    By Appointment only - Please e-mail requests to: [email protected]

  • Final Removal Date

    12/18/25

  • Estimated Dimensions

    40" x 144" x 67"

  • Estimated Weight

    3,500 Lbs

  • Seller Comment

    CONTACT ALWAYS TRUCKING for shipping quote 541-608-6532

  • Load Fee

    $250

  • page views

    2144

Flexa 27 RM7 Edgebander

The Flexa 27 Series is an affordable and flexible solution for the medium size shop with the ability of banding tape, 1-3mm pvc, laminate and wood strips. With features typically found on solutions much more expensive, the Flexa 27 Series offers a heavy duty Edgebanding solution at an entry level price.

Operating Units

Unit 1:       Pre-milling unit
Unit 2:       Glue applicator and pressure rollers
Unit 3:       Edgebanding trimming guillotine
Unit 4:       End Trim With 2 Tiltable motors  0-15 deg.
Unit 5:       Top and Bottom Trimming via 2 motors
Unit 6:       Profile/ Radius Scrape

Unit 7:       Glue Scraping

Unit 8:       Brushing

TECHNICAL DATA: 

Flexa 27 RM7 

·        Panel height

8-60 mm

0.3 -  2.36”

·        Coil edge thickness

3mm

.12”

·        Strip edge thickness

.3 - 6mm

.015 - .24”

·        Max overhang top and bottom (total top and bottom)

4 (2+2) mm

0.16”

·        Min panel width (with min length of 210mm or 8 ¼ “)

90mm

3.54”

·        Min panel length (with min width of 100mm or 3 15/16 “)

140mm

5.5”

·        Feed speed

10 m/ min

33 f/min

·        Glue Tank GP-200

 

 

o   Power

 

2.4 kW

o   Glue capacity

1.5 kg

3.3 lbs

·        End Trimming Unit IK/200 (each)

 

 

o   Motor size

 

.3 HP

o   Cutting speed

 

12,000 RPM

o   Blade tilt

 

0-15 deg.

·        Top and Bottom Trimming TT/K

 

 

o   Motor size (each)

 

.4 HP

o   Cutting speed

 

12,000 RPM

 

 

CA1781

STANDARD EQUIPMENT

·     Thick, welded Steel Frame

·     Steel pressure beam with 2 rows rubber rollers

·     Feed chain with industrial high grip rubber

o Chain on hardened steel guides

o Guides consist of one circular and one flat

·     Manual adjustment of the pressure beam w/ readout

o Automatic pos. of the working units w/ reference to panel

·     Mechanical digital indicators for panel thickness

·     High Frequency Motors w/ Inverter

·     Centralized dust extraction

·     Adjustable panel support rollers

·     Sound enclosure

·     Lockable switch cabinet

·     Equipped with

o Glue pot and edge processing magazine

o 2-Motor end trimming Unit. 0-15 deg

o 2- Motor Top and bottom trimming unit

o Edge scraping unit for 3mm

o Brushing unit

 

INCLUDED FEATURES

CA4785

Execution complying to US regulations (UL/CSA) Safety Standards

CA2074

 Anti-adhesive Unit “RA”

CA4532

Spare glue tank 1.5kg for GP200 unit

CA4053

Tool kit 3mm on all units

CA4059

Pair of additional cutters “Combi” for the trimming unit R = 3mm

CA3032

Pair of knives for edge scraping unit R = 3mm

CA4526

CA5555

CA4088

Kit for processing 6 x 60mm

Glue Scraping Unit “GS/K1”

Brushing/ Buffing Unit “BFK”

 

 

 

 ELECTRICAL DATA:

E-Stop on main control panel
230 V – 3 Ph – 60 Hz. 37 Amps 

 

 

MACHINE FEATURES

In feed and construction

·        Industrial grade in feed system with high grip, interchangeable rubber pads.

·        Guided by a chain for accurate feeding and long lasting perfection

·        Thick, Steel top pressure beam complete with two rows of rubber coated wheels.

·        Robust panel support which can be extended according to the size of the parts

MEGA 120 Controller

·        Ergonomic positioning

·        4”Graphic Display w/ multi language selection

·        Glue temp. control w/ temp

·        Unit operation and feed track start/ stop

·        Digital readouts

·        Parameter/ setting control

·        On board diagnostics

·        Partial and absolute statistical info: # of pieces worked, edge used and feeding             information

 Pre-milling unit

●       Two cutter heads with automatic timing

●       Independent high frequency motors with

●       Stock removal determined by infeed fence with digital display

●       Timed blower to clean the machined surface

●       Diamond tools

         2.4 hp each. Tools D=100mm H=49mm

         Max stock removal is H=45mm / 55mm ²

 GP-200

·        Three Pressure rollers (1 large driven, 2 idle with opposed conicity)

·        Teflon coated glue pot

·        Automatic glue temperature regulator to reduce glue temperature if machine is not in use to reduce glue heat time

·        Automatic recovery of glue

·        Automatic loader for strips

         2.4 kW. 3.3 HP Power. 1.5 Kg Capacity

End Trimming Unit IK/200

·        2 Independent high frequency motors w/ blades

·       Pneumatic tilting of the saw blade 0 – 15 deg. from control panel

·        Units slide on THK guideways

·        Mounted to the base for vibration free machining

         12,000 RPM and .3 hp each

Trimming Unit “TT/K” 

·        2 Independent high frequency motors

·        Vertical revolving copy devices and front copy pads for accurate positioning

·        Dust extraction hood

·        3mm tooling standard

        12,000 RPM and .4 hp each

Edge Scraping Unit “SCR/K”

·        For finishing 1mm – 3mm PVC/ ABS edging

·        Front and vertical copy devices for accurate positioning of the knives

·        Complete with digital mechanical readouts for accurate positioning and adjustment

·        Dust extraction

·        Supplied with 3mm tooling

Glue Scraping Unit GS/K1

  • Eliminates excess glue between panel and edge
  • Eliminates small edging overhang (0.1 – 1mm)
  • 2 Pairs of vertical rotating copiers
  • Air blowers on both cleaning knives

           Self-adjusting throwaway knives

 

Listed specifications were taken from the manufacturer’s published information and is assumed to be correct but not guaranteed.

Bidder is encouraged to inspect the machine, call with questions contact the manufacturer for more information.

Please log in to view the bid history

ALL ITEMS WILL HAVE LOADING FEES AND WILL BE ADDED TO EACH LISTING.  MOST MACHINES ARE FULLY CRATED AND CAN BE SHIPPED VIA COMMON CARRIER OR FLAT BED TRUCK/TRAILER.

LOADOUT WILL BE BY APPT. ONLY WITH A FULLY PAID INVOICE AND RECEIPT.

CONTACT ALWAYS TRUCKING 541-608-6532
$0.00 USD
LOADING FEE
$250.00 USD

All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa, MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.