Specifications are taken from manufacturer's published information but bidder is encouraged to verify.

MODEL 1901  EDGESTRIP MAGAZINE                 

• 1 (one) universal magazine for solid edges, strips, and coiled material.
• Utilizes motion detector to ensure accurate, trouble-free positioning of edge material.
• Exclusive “TRACTOR-BELT FEED SYSTEM” to ensure accurate, trouble-free feeding of edge material, as well as optimum operator safety.
• Angled strip gate to prevent double feeding of strips.
• Magazine table on rollers for smooth feeding of coiled material.
• Edge guide equipped with automatic guillotine lock-out for safety.
• “3 DEGREE APPROACH ANGLE” allows easy feeding of large wood edges.
• Automatic guillotine for coiled material up to 4.0 mm.

MODEL 1906 GLUING STATION - “CARTRIDGE SYSTEM”                   

• Equipped with HOLZ-HER'S exclusive patented "CARTRIDGE" glue system.  This is a CLOSED APPLICATION SYSTEM in which the glue is enclosed in an air- tight chamber and cannot oxidize, discolor, burn, or become contaminated with wood dust.  This allows for optimum glue adhesion.
• Glue applied to panel by patented GLUE NOZZLE from 6-45mm workpiece thickness.
• Precise control of all functions including begin and end of glue line, height of glue line, bottom of glue line, volume of glue and face melt temperature.
• Less maintenance - no glue pot to clean, fewer parts.
• Efficient glue consumption - virtually no waste.
• Efficient power consumption - uses less than half that of conventional glue pots.
• Fastest & easiest glue color change, 5-10 min.
• Fastest heat-up time in the industry, less than 3 min.
• No fumes or other environmental hazards.
• Machine can be used for trimming without heating up the glue section.

MODEL 1913 - P PNEUMATIC PRESSURE UNIT                                                             

• Large electronically-driven roller synchronized with feed speed.
• Two additional rollers are cantered enabling high gluing pressure and precise banding.
• Quick adjustment of pressure section to edge thickness by means of speed wheel and scale.

MODEL 1918 END TRIM UNIT

• Heavy duty finish with linear guide bars for precision and trimming.
• Two high frequency motors for cutting the leading and trailing edges with draw cuts. (up to 8 mm)
• Mounted with uni-point axis enabling quick change for chamfer trimming up to 10°.
• Mechanically indexes ends for a perfect finish.
• Motors:  2 x .22 KW Speed 9,000 RPM.
• Maximum edge thickness up to 13mm.
• “PCS” Pneumatic Changeover System included as standard

MODEL 1823 FLUSH TRIM UNIT

• Two high frequency motors for top and bottom rough trimming
• Vertical Tracing Wheels
• Maximum Edgestrip Thickness: 13mm

• Motor: 2 x 0.6 KW (.82 HP), 300 HZ, Speed 18,000 RPM

MODEL 1942-M COMBINATION FLUSH, CHAMFER & RADIUS TRIM UNIT

• Two high frequency motors for edge trimming 0 to 15 degrees.
• Vertical and horizontal tracing with uni-point design for no second adjustment when changing the degree of bevel.
• Maximum edgestrip thickness:  8 mm.(Standard) 13 mm with optional straight tooling.
• Air jets for debris removal.
• Radius capability up to 3 mm radius.
• Motor:  2 x 0.6 KW (.82 HP), 300 HZ, Speed 18000 RPM.
• “PCS” Pneumatic Changeover System from flush to radius from control panel included as standard
• Digital counters included.

      MODEL 1929 SCRAPER UNIT

• Uses reversible insert carbide scraping knives on the top and bottom edges.
• Normally equipped with radius tooling to finish and remove knife marks created by the top,bottom, and radius units on thick PVC edgings. (2,3 mm).
• Equipped with air-jet blowers.
• Vertical and horizontal copy wheels.
• “PCS” Pneumatic Changeover System moves Scraper Unit in and out from control panel.
• Equipped with digital readouts for all adjustment spindles.

MODEL 1983 CONTOUR TRIMMING UNIT, H.F. WITH AIR JET

• For rounding of corners: radius, chamfer, or flush trim.
• Possible radius: 2 mm and 3 mm.
• One motor, 1 x 0.6 KW, 300 HZ.
• Feed speed of 12 meters per minute. Max.
• Includes 7 Siko digitals for quick set-up.
• Equipped with reversible blade cutterhead with radius knives.

MODEL 1944K PLUNGE BUFFING UNIT

• Includes two motors with the possibility of adjustment in any direction.
• Incorporates “plunge control” to avoid rounding-over the leading and trailing edges, and ensure tight corners (thick PVC).
• Horizontal Swivel = 0 to 20 º.
• Equipped with cloth buffing wheels for smoothing the sharp edges of thin PVC band after trimming.
• Can be equipped with fine sanding wheels for finishing wood and laminate edges.
• Motor Speed = 1440 RPM.

TECHNICAL DATA:

Machine Dimensions:

Length:                                                            3250 mm / 128 in.

Width:                                                              1470 mm / 58 in.

Height:                                                             1200 mm / 47 in.

Working Dimensions:

Edge Strip Thickness:                                     0.3 - 13mm

Edge Strip Width:                                            50mm

Edge Strip Length:                                          200mm minimum - Unlimited

Workpiece Width:                                            Min. 60mm

Workpiece Length:                                          Min. 180mm

Workpiece Thickness:                                     6 - 45mm

Feed Speed:                                                    12 m/min

                                                                          (12~16mpm with Optional Variable Track

                                                                           Speed)

Air Requirement:                                              6 bar