Edge-Bander with Pre-Mill 

Capacity:  Max 1’’ (25 mm) solid wood banding, thin PVC, veneer, HPL & 3 mm PVC capacity, 2.3’’ (60 mm) max panel thickness & 7’’ (178 MM) panel length.

Equipped with:

• Granulate Gluing System with flat glue-nozzle & quick melt.
• Automatic Edge-Magazine for coil, strip, & solid wood edge-banding with tractor-belt feed system, & heavy-duty guillotine for 4 mm PVC.
• Pressure Section with 3 large dia rollers, each with individual pneumatic plunge and pressure control; Programmable with servo motor positioning, powered 1 roller with electronic speed control that is synchronized with chain feed speed.
• Pre-milling & End-trimming units, two “HF” motors @ (1hp – 2,480 RPM each) with “Uni-Point Swivel”, quick change from flush to 0° - 15° bevel programmable from operator panel.
• Flush Trimming Unit, (2.6 HP – 200 Cy HF motors), with servo controls, Three motors, for compl. workstation forward/backward, vertical copy-wheels ±.
• Fine/Bevel/Radius Trimming Unit, with five-axis servo motors, (1.5 HP – 200 Cy HF motors), bevels 0° - 45°, plus SIKO digital readouts.
• Corner Rounding Unit, for trimming leading-and-training upper-and-lower edge/corners; single, floating cutter jumps in, trims around top & bottom leading edge corner, then comes back up on feeding through panel trimming lower-and-upper corner of trailing edge (1 HP – 300 Cy HF motor), 2 mm or 3 mm radius cap. Scraper Unit, “Super Duty” smooth finishing thick PVC for a radius range from 2 – 5 mm, vertical & horizonal tracing wheels, positioning enabled through One servo motor function from control panel, as well as SIKO readouts for easy setup.
• Edge Shaper, with jump control for vertical or horizonal shaping or grooving, 3.8 KW (5 HP) spindle motor, 12,000 RPM spindle speed, max. cutter dia. 135 mm (5.3’’), max cutter width 60 MM (2.36””), servo motor positioning for shaper base & SIKO digital readouts.
• Flat Glue Scraper, top & bottom for removal of potential glue squeeze-out with air pressure nozzles to prevent shavings build-up.
• Buffing Unit, with programmable jump action for cleaning & polishing of edges (two 0.25 HP – 3,600 RPM motors), tilts 0° - 5°.
• Microprocessor with Color LCD Screen, 90% of all set-ups can be adjusted from the control panel, programmable for a large variety of edges like solid lumber, veneer strips or coils, HPL, thin & thick PVC.  Line control so there are no mechanical limit switches along the chain track.
  • Variable Feed Speed, from 8 – 24 MPM (26 – 67 FPM), panel overhang beyond chain 35 mm (1.38’’); features automatic track pad lubrication