Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8mm.

MACHINE BASE

The machine base is a rigid, ribbed steel structure and is designed to provide maximum support for the working units.  The ribs provide stability and, at the same time, provide openings in the base to facilitate removal of the chips/dust.

CAPACITIES AND SPEED

• Edgebanding thickness: .4mm - 8mm (.016-5/16”)
• Guillotine capacity: 3mm
• Feed speed: 36/52 ft/min.
• Panel height: 3/8” min – 2 3/8” max
• Minimum panel length: 5 1/2”
• Minimum panel width: 2”
• Minimum distance between panels: 24” 

 STARTOUCH CONTROLLER

The K 800 comes equipped with the new "Startouch" controller.  This controller features a 12" touch screen display. Capable of storing 100 programs, 6 at the touch of a single key. Color graphic display of all the working units. Tracks production information, diagnostic information and monitors maintenance schedules. Choose mm's or inches, as well as 5 different languages. Swivels 270 degrees and tilts for easy access.

 ACOUSTICAL SOUND ENCLOSURE

Machine comes standard with an acoustical sound enclosure that reduces the noise level and covers the entire machine. 

TOP PRESSURE BEAM

All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings. The height of the pressure beam is displayed with a mechanical digital readout.

GLUE STATION

 Teflon coated glue pot to facilitate glue changeover. Warm up time is approximately eight to ten minutes.   The unit is also equipped with a quick disconnect plug for changing from one pot to another, change out time is less then a minute. An automatic temperature kickdown feature extends glue life and reduces glue scorching. QMS system pictured is optional.

PRESSURE SECTION

There are a total of three pressure rollers for pressing the banding to the workpiece edge. The first roller is powered and applies pressure pneumatically. It is also Teflon coated to prevent the banding material from slipping. The last two idle rollers have opposing one-degree tilt to provide extra pressure along the top and bottom edge. The unit comes standard with a mechanical digital readout for the positioning. The pressure section is also equipped with pneumatic jumping so the unit activates exactly on the leading/trailing edges.

 “K-SEL” END TRIMMING STATION

This unit is composed of two independent .50 hp motors mounted on THK guides. End trim utilizes a draw cut system for reduced blade projection on thick panels. The unit comes standard with automatic tilting of the unit from the control panel with two preset positions, and dust extraction.

 EDGE TRIMMING STATION:

The top and bottom trimmers have 1.0 hp operating at 12,000 rpm., large diameter vertical and horizontal copying devices with precise digital indicators.  The unit is equipped with mechanical digital readouts for all the adjustments. Two position pneumatics is standard, it allows the operator to go from thick pvc to thin pvc through the controller. 

 RAS/1000” PROFILE SCRAPING STATION

The profile scraping station designed to remove knife marks from thick PVC. The unit is equipped with pneumatic in/out positioning through the controller. It has a large diameter horizontal copy wheel and side copy wheel device with digital indicators. The unit comes standard with 3mm knives. 

SPN BUFFING UNIT

 The buffing unit has two .25 hp motors. The unit cleans and polishes the panel edge. The unit is equipped with extra wide cotton cloth buffing wheels that break the edge and prevent rounding of the panel’s leading edge.

ACOUSTICAL SAFETY ENCLOSURE

All working units are enclosed under an acoustical safety hood that is insulated to help reduce noise and prevent accidents. The hood has a safety microswitch which prevents the machine from operating when the hood is open. The machine has a decibel rating of 86db when operating.

DUST EXTRACTION

Working units are individually ported on the top of the safety enclosure. There are up to ten individual  openings for extraction.