× Bidding has ended on this item.

Masonite - Tampa, FL - Late Model Machinery being offered! (Closed #18574876)

Homag "KAL 310/6/A20/PT" Edge Bander (2017) KVAL "M-3000" KVAL "FACE" Nordfab "quick-fit" Dust Pipe

Terms & Conditions
Shipping Information
This Auction Uses Proxy Bidding.
Ended

KVAL "Face" CNC Door Machine

Was in operation until a little over a month ago.

  Lot # 003
Listing Image
2019-11-01 12:25:02 PT 2019-11-01 12:25:02 PT America/Denver KVAL "Face" CNC Door Machine KVAL FACECNCEntryDoorRouter/Drill/Mortiser for Architectural Doors. KVAL CNC and drill for mortise lock function holes, viewers and routed pockets necessary for exit devices and card locks. Four PERSKEhigh frequency routers,(2) mounted above the door and (2)below. All holes larger than 3/8 are routed either into the door face for half holes, or through both sides for through holes, with the bits almost touching in the middle of the bore. This eliminates any danger of tear-out on the door face. ATC for Router tooling. Axes/Drives X, Y, Z, U, V andW. GALIL Motion Controllers. Controlleraccepts many input parameters, for example: Locks Definition/Shape Definition;T-Strike;Cylindrical -Rectangular-Flushbolt.Face Lock Group: Face Hole, Face Rectangle, Face Special; DOORLITE Hole: Rectangle, Doorlite Special, Cylindrical for Architect or Commander . Ship weight 5,000 Lbs. Monitor Keyboard are not shown as they are packed and ready for shipment. All written specifications were obtained from brochures and phyiscal inspection. We have done our best to ensure accuracy, but are not guaranteed. We encourage you to contact us to set-up a personal inspection and verify any information for yourself. Unknown
Description

KVAL FACE CNC Entry Door Router/Drill/Mortiser for Architectural Doors.

KVAL CNC and drill for mortise lock function holes, viewers and routed pockets necessary for exit devices and card locks.

Four PERSKE high frequency  routers, (2) mounted above the door and (2) below. All holes larger than 3/8” are routed either into the door face for half holes, or through both sides for through holes, with the bits almost touching in the middle of the bore. This eliminates any danger of tear-out on the door face.

ATC for Router tooling. Axes/Drives X, Y, Z, U, V and W. GALIL Motion Controllers.

Controller accepts many input parameters, for example: Locks Definition/Shape Definition; T-Strike; Cylindrical -Rectangular -Flushbolt. Face Lock Group: Face Hole, Face Rectangle, Face Special; DOORLITE Hole: Rectangle, Doorlite Special, Cylindrical for Architect or Commander                         .       

Ship weight 5,000 Lbs.

Monitor & Keyboard are not shown as they are packed and ready for shipment.

All written specifications were obtained from brochures and phyiscal inspection.  We have done our best to ensure accuracy, but are not guaranteed.  We encourage you to contact us to set-up a personal inspection and verify any information for yourself.

Additional Information
  • Located Tampa, FL
  • MAKE KVAL
  • MODEL "Face" CNC Door Machine
  • SERIAL NUMBER 93/38003
  • PHASE 3 PHASE
  • VOLTAGE 460 VOLT
  • INSPECTION DATE By Appointment only - Please e-mail requests to: [email protected]
  • FINAL REMOVAL DATE 11/14/2019
  • ESTIMATED DIMENSIONS 192"L x 84"D x 72"H
  • ESTIMATED WEIGHT 5,000 Lbs
  • Shipping Info A rigger is required for this lot. CONTACT ALWAYS TRUCKING for shipping quote 541-608-6532
  • Lot # 003
  • System ID # 18585127
  • End Date
  • Start Date
  • 1200 Page Views
Shipping Options
CONTACT ALWAYS TRUCKING 541-608-6532 $0.00 USD
CONTACT LOCAL RIGGER $0.00 USD