× Bidding has ended on this item.

Masonite - Tampa, FL - Late Model Machinery being offered! (Closed #18574876)

Homag "KAL 310/6/A20/PT" Edge Bander (2017) KVAL "M-3000" KVAL "FACE" Nordfab "quick-fit" Dust Pipe

Terms & Conditions
Shipping Information
This Auction Uses Proxy Bidding.
Ended

KVAL "M-3000" Deep Pocket Mortiser

Was in operation until a little over a month ago.

  Lot # 002
Listing Image
2019-11-01 12:05:00 PT 2019-11-01 12:05:00 PT America/Denver KVAL "M-3000" Deep Pocket Mortiser The M-3000 mortises up to 10 long and 5 - 1/2 deep. Mortise width is determined by bit size. Machine features include an inverted caster table for easy door positioning against either a right or left hand doorstop. The belt driving spindle is powered by a 7- 1/2 HP HIGH FREQUENCY MOTOR, and turns at approximately 9000 RPM. In operation the door is manually positioned by the operator against a stop and pressing a pedal clamps it in place with air cylinders. The automatic mortising sequence is started by push-button, and typically requires 30-40 seconds. To minimize over all machine length the M-300 routing carriage is supported on four 1- linear bearings so it can be quickly adjusted with reference to the doors top. To adjust the operator releases a wing lever, rolls the mortising carriage to appropriate position using a scale and indicator, then re-tightens the wing lever. All written specifications were obtained from brochures and phyiscal inspection. We have done our best to ensure accuracy, but are not guaranteed. We encourage you to contact us to set-up a personal inspection and verify any information for yourself. Unknown
Description

The M-3000 mortises up to 10" long and 5 - 1/2' deep. Mortise width is determined by bit size.

Machine features include an inverted caster table for easy door positioning against either a right or left hand doorstop. The belt driving spindle is powered by a 7- 1/2 HP HIGH FREQUENCY MOTOR, and turns at approximately 9000 RPM.

In operation the door is manually positioned by the operator against a stop and pressing a pedal clamps it in place with air cylinders. The automatic mortising sequence is started by push-button, and typically requires 30-40 seconds. To minimize over all machine length the M-300 routing carriage is supported on four 1-" linear bearings so it can be quickly adjusted with reference to the doors top. To adjust the operator releases a wing lever, rolls the mortising carriage to appropriate position using a scale and indicator, then re-tightens the wing lever.

All written specifications were obtained from brochures and phyiscal inspection.  We have done our best to ensure accuracy, but are not guaranteed.  We encourage you to contact us to set-up a personal inspection and verify any information for yourself.

Additional Information
  • Located Tampa, FL
  • MAKE KVAL
  • MODEL "M-3000" Deep Pocket Mortiser
  • SERIAL NUMBER 03-32509
  • YEAR 2003
  • PHASE 3 PHASE
  • VOLTAGE 460 VOLT
  • INSPECTION DATE By Appointment only - Please e-mail requests to: [email protected]
  • FINAL REMOVAL DATE 11/14/2019
  • ESTIMATED DIMENSIONS 130"L x 72"D x 72"H
  • Shipping Info A rigger is required for this lot. CONTACT ALWAYS TRUCKING for shipping quote 541-608-6532
  • Lot # 002
  • System ID # 18580743
  • End Date
  • Start Date
  • 814 Page Views
Shipping Options
CONTACT ALWAYS TRUCKING 541-608-6532 $0.00 USD
CONTACT LOCAL RIGGER $0.00 USD