× Bidding has ended on this item.

Masonite - Tampa, FL - Late Model Machinery being offered! (Closed #18574876)

Homag "KAL 310/6/A20/PT" Edge Bander (2017) KVAL "M-3000" KVAL "FACE" Nordfab "quick-fit" Dust Pipe

Terms & Conditions
Shipping Information
This Auction Uses Proxy Bidding.
Ended

Homag "KAL310/6/A20/PT" Edgebander (2017)

Extra Diamond Tooling (most New), Extra Rebuilt Glue Pot, & more included!

  Lot # 001
Listing Image
2019-11-01 12:10:12 PT 2019-11-01 12:10:12 PT America/Denver Homag "KAL310/6/A20/PT" Edgebander (2017) Capable of Edge Banding on a 3 Bevel for Doors. 0.4 - 20 mm Edge thickness cap., min. panel width 55 mm for panel thickness 12 - 22 mm under; 100 mm for panel thickness over 22 - 60 mm. 18 MPM Fixed feed speed (60 FPM); 80 mm feed track pads, and V-groove belt on top pressure beam which is motorized for raising/lowering into position. Pre-Milling Unit with (2) 3.0 kW motors (4.0 HP - 12,000 RPM each); Quick Melt Glue System with Pre-melt hopper feeder roller applicator (reversible). Mechanically Controlled Pressure Roll Section with (1) large dia. driven (6) idle rollers. HL-83 Double End Trim/Snip (0.5 kW - 200 Hz, 12,000 RPM each) to cut excess edge on the front back of the panel; snipping for 0 - 45 angle. Top/Bottom Rough Trim (1.5 kW motors). Top/Bottom Fine Trim Station, 8-position turret for quick manual changeover of different edge thickness processing (two motors, 0.4 kW - 12,000 RPM each), SIKO digital counters for adjustments. Top Bottom Profile Scraping. Top Bottom Edge Scraping. Top Bottom Buffing Units. Line control with: HOMATIC Power Touch controller features, Touch Screen Control. SIKO Digital adjustments; electronic DC brakes on all trim motors, sound cabins for all trim workstations, adjustable outboard panel support with swing out arms for up to 800 mm. Room to install extra Work Stations as your needs demand Also Included: Diamond Tooling, Extra Rebuilt Glue Pot, Glue Pot Cleaner, Transformer, Buffing wheels, Chemicals More. All written specifications were obtained from brochures and phyiscal inspection. We have done our best to ensure accuracy, but are not guaranteed. We encourage you to contact us to set-up a personal inspection and verify any information for yourself. Unknown
Description

Capable of Edge Banding on a 3° Bevel for Doors.

0.4 - 20 mm Edge thickness cap., min. panel width 55 mm for panel thickness 12 - 22 mm & under; 100 mm for panel thickness over 22 - 60 mm.

18 MPM Fixed feed speed (60 FPM); 80 mm feed track pads, and V-groove belt on top pressure beam which is motorized for raising/lowering into position.

Pre-Milling Unit with (2) 3.0 kW motors (4.0 HP - 12,000 RPM each); "Quick Melt" Glue System with Pre-melt hopper feeder & roller applicator (reversible).

Mechanically Controlled Pressure Roll Section with (1) large dia. driven & (6) idle rollers.

HL-83" Double End Trim/Snip (0.5 kW - 200 Hz, 12,000 RPM each) to cut excess edge on the front & back of the panel; snipping for 0° - 45° angle.

Top/Bottom Rough Trim (1.5 kW motors).

Top/Bottom Fine Trim Station, 8-position turret for quick manual changeover of different edge thickness processing (two motors, 0.4 kW - 12,000 RPM each), SIKO digital counters for adjustments.

Top & Bottom Profile Scraping.

Top & Bottom Edge Scraping.

 Top & Bottom Buffing Units.

Line control with: HOMATIC Power Touch" controller features, Touch Screen Control.

SIKO Digital adjustments; electronic DC brakes on all trim motors, sound cabins for all trim workstations, adjustable outboard panel support with swing out arms for up to 800 mm.

Room to install extra Work Stations as your needs demand

Also Included:

Diamond Tooling, Extra Rebuilt Glue Pot, Glue Pot Cleaner, Transformer, Buffing wheels, Chemicals & More.

All written specifications were obtained from brochures and phyiscal inspection.  We have done our best to ensure accuracy, but are not guaranteed.  We encourage you to contact us to set-up a personal inspection and verify any information for yourself.

Additional Information
  • Located Tampa, FL
  • MAKE Homag
  • MODEL "KAL310/6/A20/PT" Edgebander (2017)
  • SERIAL NUMBER 0-200-09-1710
  • YEAR 2017
  • PHASE 3 PHASE
  • VOLTAGE 460 VOLT
  • INSPECTION DATE By Appointment only - Please e-mail requests to: [email protected]
  • FINAL REMOVAL DATE 11/14/2019
  • ESTIMATED DIMENSIONS 30'L x 6'W x 6'H
  • Shipping Info A rigger is required for this lot. CONTACT ALWAYS TRUCKING for shipping quote 541-608-6532
  • Lot # 001
  • System ID # 18577355
  • End Date
  • Start Date
  • 1799 Page Views
Shipping Options
CONTACT ALWAYS TRUCKING 541-608-6532 $0.00 USD
CONTACT LOCAL RIGGER $0.00 USD