Ask Seller
Dotul "BR-233" Horizontal Door Stile and Rail Boring Machine 
Ended
Liberty Valley Door - Complete Plant Closure - Cotati, Ca
- Winning Bid : $8,900.00 USD Sold
- 93 Bid(s)
- High Bidder: w****r
Liberty Valley Doors - COMPLETE PLANT CLOSURE - Cotati, CA ( Closed #17096042 )
OVER 200 LOTS! ASSETS INCLUDE JOOS HP-120 HOT PRESS, (2) WINTERSTEIGER THIN CUT FRAME SAWS, WEINIG PROFIMAT MOULDER, (5) SAWSTOPS, (4) TIGER STOPS W/ WHIRLWIND POP UP SAWS, SHODA CNC ROUTER, ROSENQUIST RF MACHINE, SHAPERS, JOINTERS, PLANERS, DUST COLLECTION SYSTEM, WEIMA BRIQUETTER, PLUS MUCH MORE!
-
Item Location
6005 Gravenstein Hwy. Cotati, CA 94931
-
Make
Dotul
-
Model
BR-233
-
Serial Number
HW0710010
-
Year
2007
-
Phase
3 PHASE
-
Voltage
220 VOLT
-
Inspection Date
September 17, 2019 (9 AM - 3 PM) or by appointment
-
Final Removal Date
September 27, 2019
-
Estimated Dimensions
126" L x 48" W x 48" H
-
Estimated Weight
1,850 Pounds
-
Seller Comment
Non NEGOTIABLE LOAD FEE $250
-
page views
3102
The BR-233 Horizontal Door Stile & Rail Boring Machine is designed to drill dowel holes in any door stile up to 10 ft. in length all at the same time. The heads can then be turned inward to drill the dowel holes in the rails. Stiles that are longer than 10 ft. may be drilled in sequential steps. The boring heads can be adjusted from left to right with a simple hand wheel turn that will accurately locate the drill heads at the desired spacing. Standard dowel drill bit diameters can be used with a 7/16”- 14” threaded shank. Changing the spacers on each table top will adjust for the thickness on a 2 ¼”, 1 ¾” and 1 3/8” thick door stile or rail. The beds are designed to adjust for any thickness you desire up to 4 ½” to the center of the part. After completing the drilling on your stiles, you can change the position of any two heads to drill all the holes in the door rails at the same time. Each of the boring heads is controlled by a central control panel unit that is set on a movable stand for ease of operation. Each table has its own pneumatic hold down clamp that can be controlled individually or all together with the other clamps. The hold down clamps can be easily positioned over the material for the best results.
|
Overall Length |
126” |
|
Overall Width |
48” |
|
Height from Floor to Table Top |
34” |
|
Table Size |
14” wide x 8” deep |
|
Standard Machine Bits |
3 -5 spindle heads L/H & R/H drill bits |
|
Motors |
3 – 220/440 volt 5 HP – 3 phase |
|
Drill Stroke |
4” |
|
Motor Mount Swing |
360 degrees |
|
Drill Speed |
3450 rpm |
|
NW Weight |
1600 lbs |
|
GW Weight |
1850 lbs |
Specs & Information about this lot were taken from literature and physical inspection. They are thought to be accurate, but not guaranteed. Please take advantage of the inspection day(s) to verify all information.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed. For machinery moving/rigging please contact John King @ Precision Crane, 707-546-6900, [email protected].
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.