Ask Seller
Vitap Eclipse Contour Edgebander 
Ended
Vitap Eclipse Contour Edgebander - Brook Park, OH
- Winning Bid : $16,550.00 USD Sold Reserve Price Met
- 19 Bid(s)
- High Bidder: d****n
Vitap Eclipse Contour Edgebander - Brook Park, OH ( Closed #14363832 )
Machine was never put into production and has nearly zero run hours. Seller was trained on machine but contract requiring its use did not come through.
-
Item Location
15655 Brookpark Rd. Brook Park, OH 44142
-
Make
Vitap
-
Model
Eclipse
-
Serial Number
410620M
-
Year
2014
-
Phase
3 PHASE
-
Voltage
220 VOLT
-
Inspection Date
By appointment only, contact Jack Ragan
-
Final Removal Date
February 8, 2019
-
Estimated Dimensions
83" Length x 63" Width x 63" Height
-
Estimated Weight
1,100 Pounds
-
Seller Comment
Seller has forklift available for loading, $100 loading fee
-
page views
2517
Vitap Eclipse automatic contour edge-banding with glue pot and trimming machine for big and small pieces includes:
Two (2) bags of Jowat glue included
Edgebanding station
Glue and tape application on big and small shaped panels
2.2 pound capacity glue pot
Two (2) rollers to copy the shape of the piece
Utilizes 2 x 800 heating elements with electronic temperature control via thermo regulator
Glue application amount is adjusted via a knob
Set up of the glue temperature
Automatic guillotine for coiled material up to 3 mm x 45 mm
Guillotine is activated by an electronic encoder for closed edged pieces for the joint of the extremities of the tape or by encoder when the piece has only one side contoured
Manual feeder of the panel
Raise-able working table for small panels
Electronic counter for cutting off edgebanding
On/off automatic feeder of the panel
Two (2) rollers to copy the shape of the piece
Trimming station
Trimming unit with two (2) motors 0.67 HP high frequency, 12,000 RPM with up/down/front copiers and pneumatic system to lift the motors approaching the pieces to be trimmed
On/off trimming unit
Two (2) brazed cutters R=3 bevel =15° D=69 (MIN. 60) Z=6
Raise-able working table for small panels
Turning table unit for large panels
Holding arm with vacuum table to hold the big panels for edging and trimming
Dust extraction - 80 mm/3.15" port
Inside minimum radius - 250 mm (as a general rule – application dependent)
16 – 60 mm panel with 1 mm edge tape
16 – 40 mm panel with 2 mm edge tape
16 – 30 mm panel with 3 mm edge tape
With 1 mm edge tape – the minimum outside radius is 30 mm (as a general rule)
With 2 mm edge tape – the minimum outside radius is 50 mm (as a general rule)
With 3 mm edge tape – the minimum outside radius is 80 mm (as a general rule)
Height of tape = 18 mm/0.7" minimum to 64 mm/2.5" maximum
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginPick-ups are to be scheduled by appointment only. Please contact Sabrina Burns at 209-839-7707 or [email protected] to schedule an appointment. For freight quotes please contact Aaron at All-Ways Trucking at 541-608-6532. Buyer bears all costs to remove and load this lot. Buyer must remove entire lot purchased. Anyone removing non-hand carriable lots must provide MachineryMax, Inc. with a certificate of insurance (COI) before purchased items can be removed.
All buyers agree to make full payment to MachineryMax, Inc. within 48 hours of the online closing date for the auction lots purchased. All invoices over $1,500.00 are to be made by bank wire transfer or cashier’s check payable to MachineryMax, Inc. Purchases under $1,500.00 may be made using Visa MasterCard, or American Express (2% credit card processing fee will be added to the invoice). All payments are to be made in USD currency only. Bidder represents and warrants to MachineryMax, Inc. that such bidder has immediately available funds to fully pay for its successful bids within 48 hours of the online closing date. All payment questions should be directed to Sabrina Burns at 209-839-7707 or [email protected] All buyers agree that there will be a 15% Buyers premium that will be added to the final invoice.