0.3 - 15 mm Thickness edgebanding capability (3 mm coil or 15 mm max. strip).  6 - 50 mm Panel thickness, workpiece width min. of 60 mm; workpiece Length min. 180 mm.  Feed speed 12.5 MPM (41 FPM).

Pre-Milling Station "1961": (2) 2.0 kW - 12,000 RPM motors; With digital readouts for accurate positioning.
 

 "1903" Edgestrip Magazine; (1) Universal magazine for solid edges, strips, and coiled material.
Utilizes motion detector to ensure accurate, trouble-free positioning of edge material; exclusive "Tractor-Belt feed System", edge guide equipped with automatic guillotine lock-out for safety, 3° approach angle allows easy feeding of large wood edges.
Pre-Milling Station "1961": (2) 2.0 kW - 12,000 RPM motors; With digital readouts for accurate positioning.
 

"1906" Gluing Station - Cartridge System with motorized, programmable glue height adjustment.

"1913" Pressure Section, servo motor controlled with (1) large driven roller & (2) cantered idle rollers.
 

End Trimming, "1918": Front & rear with (0.35 kW - 9,000 RPM motor each), Uni-Point axis for no re-indexing when changing from flush to bevel end trim (0° - 10° bevel),"PCS" Pneumatic Changeover from flush to bevel from control panel.
Flush/Pre-Trimming Unit "1823": Top & bottom with (0.6 kW - 300 Cy HF motors 18,000 RPM Motor ea.), SIKO digital readouts.
Flush/Bevel/Radius Trimming Unit "1824": Servo controlled top & bottom with (0.6 kW - 18,000 RPM each motor).
Profile Scraping Unit "1929": Top & bottom for thick PVC scraping, reversible insert carbide knives, equipped with air-jet blowers; Chip Collector Box.
Corner Rounding Unit "1983": 1-Motor unit for edges up to 3 mm edge thickness.
Flat Glue Scraping Unit 1964, top/bottom plc controlled to remove potential glue squeeze-out on the surface of the panel.
Buffing Station"1940": Top & bottom, with timed pneumatic plunge controll, adjust in any direction (vertical tilt is 0° - 5°, horizontal Swivel is 0° - 20°); 1,440 RPM wheel rotation.
 

Programmable Logic Control (PLC) with windows like user interface for edge feed, glue application, end trimming, flush trimming, radius trimming, scraping, corner rounding, and buffing. Programs can be easily created and recalled at will; color screen with graphic interface makes programming easy, icon of each unit may be brought up on the screen to show the operator the status of the unit and the parameters which can be programmed. Edgebander can be operated manually when required, without the necessity to write a program.

Microprocessor for line control & glue temperature, 10 KVA static frequency changer, outboard panel support, and sound enclosure w/interior lights over enclosed workstations of the machine, & used tooling on the stations.

Return conveyor is not included - See lot #032