Ask Seller
SCM Tech-90 Point-to-Point CNC Router 
Ended
Grand American Doors - La Mirada, CA
- Winning Bid : $411.00 USD Sold
- 10 Bid(s)
- High Bidder: h****m
Grand American Doors - La Mirada, CA ( Closed #13277298 )
Grand American Doors, was a door manufacturer in business for over 30 years. There are 91 lots including a large central dust collector, moulders, louver groovers, wide belt sanders, planers, shapers, RF equipment, CNC shaper and more! Please note this is a relatively short auction and there are two pick up locations.
-
Item Location
1060 Ortega Way, Suite B Placentia, CA 92870
-
Make
SCM
-
Model
Tech-90
-
Serial Number
-
Year
-
Phase
3 PHASE
-
Voltage
230 VOLT
-
Inspection Date
December 3rd 11:30 am - 1:00 pm, machines are offline and palletized
-
Final Removal Date
December 12 - December 14, 2018 unless other arrangements are made
-
Estimated Dimensions
165″ x 95″ x 70″
-
Estimated Weight
5,800 Pounds
-
Seller Comment
See shipping section for details
-
page views
1149
Specifications
- X-Axis: 2,150mm [84-5/8”]; Y-Axis: 800mm [31-1/2”]
- Cantilevered head w/ DC servo drive on X and Y axis at 230fpm and 59fpm on Z axis
- X moves via precision THK ways and ground helical rack; Y and Z moves via hardened ground ball screw
- Six pneumatic panel supports with two vacuum cups each
- Ten additional panel lifters with vacuum attachments for routing
- Two zones with four working fields with one central, six rear and two lateral stops with double zero refs.; stops raised and lowered by start/stop of machining cycle
- Vacuum pump: 40cmh
- 11 spindle block on a 4.5hp, 4,000rpm motor with this configuration; 9 vertical and independent (5-X and 4-Y); 2 horiz. spindles for end boring
- Router: 4-1/2hp, max 16,000rpm; MK-2 collet with RH rotation; one 120mm, 1-1/2hp grooving saw at 6,000rpm
- CNC Control KLT 10400 256 Ram
- Approx. Shipping Weight: 5,800 Lbs.
- Approx. Shipping Dimensions: 165″ L x 95″ W x 70″ H
- 230v, 3ph
Runs production while programming and scanner ready for bar-coding.
The listed specifications & information were taken from the manufacturer’s published information, internet research, or seller’s description.
The specifications & information are assumed to be correct; however, in no way, guaranteed. Bidders are encouraged to inspect the machine, call with questions, or contact the manufacturer for more information.
Please log in to view the bid history
LoginFor rigging and loadout contact:
Marco Salinas @ West Coast Machinery Movers, 323-533-0614, [email protected]
Marco is the on-site rigger insured for this facility and will manage all load outs.
For shipping contact:
Steven Murray @ Listo Services
www.listoservices.com
[email protected]
360-271-5275 cell phone (text ok)
Do Not Show Up Until You Have Made Arrangements After Bidding With the Rigging Company Or Albright Machinery
Payment is due withing 24 - 48 hours of auction close
Credit Card / Wire Transfer Accepted. (Checks/Money / Orders / Cashiers Checks will not be accepted)
Removal is 3 days from auction close unless other arrangements are made in advance There are machines such as the central dust collector that would be acceptable to have more time for load out as long as arrangements are made in advance.
There will not be any exceptions unless arrangements are made prior to auction close approved by landlord and Albright Machinery.