SCM GROUP MODEL #K560TE HEAVY DUTY AUTOMATIC EDGEBANDER MACHINE

230 VOLT, 3-PHASE MACHINE

SERIAL #AH/117060

YEAR 2013 BUILT MACHINE INSTALLED NEW IN 2014.

**MACHINE IN GOOD OPERATIONAL AND RUNNING CONDITION.

**SPECS AS PULLED FROM MANUFACTURER WEBSITE(PLEASE NOTE AN EXPANDED QUOTATION IS ALSO ATTACHED TO THIS LISTING WHICH GIVE THE EXACT SPECS. OF THIS MACHINE:

Automatic single sided edgebander designed to be used for edgebanding straight vertical profiles with coiled material (veneer and PVC) and with strips (high-pressure laminate and solid wood) with a maximum thickness of 8mm.

MACHINE BASE

The machine base is made of a tubular steel structure and is designed to assure maximum stability and accuracy.

TOP PRESSURE BEAM

All operating units raise and lower simultaneously when the pressure beam is adjusted. No adjustment is required for the glue roller when changing panel thickness. The pressure beam has two rows of staggered pressure rollers with steel bearings. 

CAPACITIES AND SPEED

• Edgebanding thickness: .4mm - 6mm (.016-1/4”)
• Guillotine capacity: 3mm
• Feed speed: 36/52 ft/min.
• Panel height: 3/8” min – 2 1/8” max
• Minimum panel length: 5 1/2”
• Minimum panel width: 2 3/8”
• Minimum distance between panels: 20” 

GLUE STATION

Teflon coated glue pot to facilitate glue changeover. Warm up time is approximately eight to ten minutes. The unit is also equipped with a quick disconnect plug for changing from one pot to another.

PRESSURE SECTION

There are a total of three pressure rollers for pressing the banding to the workpiece edge. The first roller is powered,and it is also Teflon coated to prevent the banding material from slipping. The two idle rollers have opposing one-degree tilt to provide extra pressure along the top and bottom edge. The machine comes standard with an automatic strip magazine. Comes standard with a mechanical digital readout for the positioning of the pressure section. The glue pot is Teflon coated and has a 5.5lb. capacity.

ORION 1 PLUS CONTROLLER

 The machine comes equipped with the Orion 1 Plus controller. It has a LCD alpha numeric display. Operator has their choice of multiple languages. Soft touch keypad is standard. Operator can program glue temperature, monitor diagnostics and keep track of statistical information both partial and absolute. All functions can be controlled and selected from the keypad.

 ADUSTABLE INFEED FENCE

The infeed fence is manually adjustable with a mechanical digital readout for determining stock removal.

RT-V PRE-MILLING STATION:

To rectify/clean panels already sized and squared before the edge is applied. The unit is composed of two high frequency motors (2.0hp) with jumping action controlled through the PLC.  The cutting heads are adjustable vertically. Diamond cutters are standard with 49mm height. 

K-SEL 2” END TRIMMING STATION

 This unit is composed of two independent .50 hp motors mounted on THK guides. End trim utilizes a draw cut system for reduced blade projection on thick panels. The unit comes standard with automatic tilting of the unit from the control panel with two preset positions. 

R/K EDGE TRIMMING STATION  

 This unit is composed of two independent .7 hp motors operating at 12,000 rpm. It comes standard with THREE position pneumatics, this allows the operator to go from thin tape, to 3mm pvc, to solid wood, through the control panel. All adjustments are carried out with mechanical digital readouts. The unit has top and bottom copy wheels and side copy shoes. The motors have quick release plugs to facilitate tooling changes.

 RAS / K PROFILE SCRAPING STATION

The profile scraping station designed to remove knife marks from thick PVC. The unit is equipped with pneumatic in/out positioning through the controller. It has a large diameter horizontal copy wheel and side copy wheel device with digital indicators. It features a quick knife replacement system and comes with 3mm knives. 

SP-V BUFFING UNIT

 The buffing unit has two .25 hp motors. It can also be tilted up to 12 degrees to provide a softer, more refined edge finish

ACOUSTICAL SAFETY ENCLOSURE

All working units are enclosed under an acoustical safety hood to reduce noise and prevent accidents. The hood has a safety microswitch which prevents the machine from operating when the hood is open. 

CENTRALIZED DUST EXTRACTION

Machine comes with two 3” ports for the premilling station, two 2” ports for the top and bottom trim station and one 3” port for the 3mm collection bin for extraction.